Summary

Overview

Work History

Education

Skills

Certification

References

PREFERENCES

Timeline

WILNEYLIAM RONY

Technician

Bintulu

Summary

As a recent experience (Technician), I am dedicated to leveraging my expertise to excel in roles related to management, piping or technician. I am driven to make meaningful contributions to the team’s success while advancing my career in the industry.

Overview

years of professional experience

Certifications

Languages

Work History

Control Bolting Technician

MATCO Engineering

07.2025 - 08.2025

Replacement valve.
Servicing stud&bolt.
Re-gasket.
Rigging the valve to service the pipe line.
Perform HTW for tightening method.

Control Bolting Technician

Justrite Construction

05.2025 - 07.2025

Shutdown “ Turn Around TA ABF Bintulu “
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.
Completed complex repairs quickly by leveraging strong diagnostic skills and attention to detail.
Demonstrated adaptability when faced with new challenges or technologies, enabling quick mastery of necessary skills.

Control Bolting Technician

Justrite Construction

04.2025 - 05.2025

Maintenance job at Module 1 MLNG, Bintulu Sarawak.
Replacement stud & bolt, gasket or etc.
Break down and Tightening Strainer Pump.

Control Bolting Technician

Justrite Construction

03.2025 - 04.2025

Shutdown “ Turn Around TA Module 2 MLNG “
Breaking the joint using Hydraulic Torque Wrench.
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.

Control Bolting Technician

Maysville Sdn Bhd

02.2025 - 03.2025

Shutdown “ Turn Around Marlin MLNG “
Performing HTW/HBT and Manual Torque.
Assisted other Technician.
Replace valve.

General Worker

BWS Engineering

11.2024 - 02.2025

Leveraged strong organizational skills for effectively managing multiple tasks simultaneously without compromising quality or missing deadlines.
Contributed to increased sales by offering top-notch service and product knowledge to customers.
Implemented creative problem-solving techniques for tackling complex challenges faced by the team or department.
Enhanced team productivity by streamlining processes and improving communication channels.

Control Bolting Technician

Justrite Construction

09.2024 - 10.2024

Shutdown “ Turn Around TA Module 1 MLNG “
Breaking the joint using Hydraulic Torque Wrench.
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.
Enhanced safety protocols, conducting regular inspections and safety drills for technical team.
Maintained meticulous records of maintenance activities, ensuring compliance with industry standards.

Control Bolting Technician

Justrite Construction

07.2024 - 08.2024

Shutdown “ Turn Around TA Module 7 MLNG “
Breaking the joint using Hydraulic Torque Wrench.
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.

Control Bolting Technician

Justrite Construction

05.2024 - 06.2024

Shutdown “ Turn Around TA Module 9 MLNG “
Breaking the joint using Hydraulic Torque Wrench.
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.

JIT Inspector QC (Joint Integrity Technician)

Justrite Construction

04.2024 - 05.2024

Shutdown “ Turn Around TA Module 9 MLNG “
Check the joint detail exp ; hi-lo, flange gap, gasket, material flange and stud bolt, rating joint and tagging for proceed to break down.
Finding the joint location for break down & spading
Request for re-placement material such as stud bolt and machining flange surface

JIT Inspector QC (Joint Integrity Technician)

Justrite Construction

03.2024 - 04.2024

Shutdown “ Emergency PITSTOP ABF 2024 “
Inspected a tightening joint
Fill the JICS inspection form
Recording a complete joint
Accept or reject joint

Technician

Justrite Construction

02.2024 - 02.2025

“ Justrite Workshop “
Preparing equipment ; power head, torqueing pump, tensioning pump, rachet link, twin fit hose, interconnecting hose, air hose, bolt tensioner and tools
Repair and service pump and torqueing & tensioning equipment

Pipe Fitter

Petra Resources Sdn Bhd

12.2023 - 01.2024

Improved workflow with efficient pipe system modifications, including cutting, threading, welding, and soldering components as needed.
Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
Followed safe work practices, which included fall protection and personal protective equipment.
Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.

Control Bolting Technician

Justrite Construction

06.2023 - 09.2023

Shutdown “ ABF Bintulu“
Breaking the joint using Hydraulic Torque Wrench.
Tightening the joint using Hydraulic Torque Wrench & Hydraulic Bolting Tensioning after services and repairing the joint.
Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.

Pipe Fitter

Petra Resources Sdn Bhd

04.2023 - 05.2023

Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
Utilized specialized tools and equipment for precise pipefitting processes, ensuring optimal results for each project.

Various Roles

PEKAN ENGINEERING

08.2022 - 02.2023

Pipe Fitter - Pipe fabrication, installation, and alignment at Laiwei Industri Sdn Bhd, Pasir Gudang Johor.
Fitter & Welder - Installation of plate bar / C-channel / angle iron structures and more. Worked on sites like tank foundations, Power Generator Box sites and others.
Fabricator - Prepared Materials for use at the worksite and carried out fabrication processes in the workshop.
Mechanical Fitter - Installation and opening valves, as well as valve maintenance work such as repairing threads on studbolt holes and changing gaskets for the Kasawari project at MMHE Pasir Gudang Johor.
E&I Helper - Fabrication and installation of support for Electrical and Intrumentation on the Kasawari platform at MMHE Pasir Gudang Johor.

Blasting & Painting Helper

Apex Global Engineering

07.2022 - 08.2022

Facilitated faster drying times through expert utilization of fans and other ventilation methods while working in confined spaces or humid conditions.
Minimized waste by properly storing unused paint and cleaning equipment after each use.
Improved painting efficiency by preparing surfaces, including sanding and scraping, for professional painters.
Assisted in accurately estimating required materials for upcoming projects based on job specifications provided by clients or supervisors.

Mechanical Fitter

PEKAN Engineering

09.2019 - 07.2021

Dismantled and reassembled delicate mechanisms.
Safely operated machinery to avoid injuries and accidents and encouraged others to do same.
Performed onsite maintenance and repair work.
Reviewed finished equipment for accurate fit and assembly.
Maintained a clean work environment by following established housekeeping procedures, reducing hazards and ensuring worker safety.
Assisted in training junior mechanical fitters on proper techniques, fostering effective teamwork and skill development within the department.

Fabricator Helper

Metal Fabrication

06.2019 - 04.2021

Collaborated with team members to troubleshoot issues during the fabrication process, preventing delays in project timelines.
Contributed to timely project completion by efficiently preparing materials for fabrication using cutting and grinding tools.
Assisted with the inspection of completed projects, identifying any defects or issues for correction before delivery.
Aided in inventory management by tracking material usage and replenishing supplies as needed, avoiding unnecessary downtime.

Helper / Rigger

NR Rezqi

07.2018 - 05.2019

Job Scope :
Worked on ship repairs such as ship fender maintenance, padeye fabrication, and painting.
Followed supervisor instructions to complete tasks on time.
Used equipment properly to avoid workplace hazards or injuries.
Cleaned and straightened work areas to maximize productivity and safety.

Education

SMK BAHANG

Kota Kinabalu, Sabah, Malaysia

04.2001 -

Skills

Good in Teamwork
Attention to Details
Time Management and Organization

Problem-Solving
Critical Thinking
Finishing techniques

Certification

Medical Offshore Petronas/Shell - Valid until 2025-03-06

References

Bonie Daniel, Anak Undi, Project Engineer, bonie.daniel@jrc.com.my, 010-952 1620, Justrite Construction

PREFERENCES

EXPECTED SALARY
Negotiable
POSSESSED OWN TRANSPORT
Yes
DRIVING LICENSED
D

07.2018 - 05.2019

SMK BAHANG

04.2001 -