WAN NURSYAFIEKAH WAN NAWANG

Summary

Results-driven Mechanical Design Engineer with 6 years of experience and training in engineering design creation. Leverages mechanical engineering techniques, drafting designs and industry best practices to consistently accomplish project goals. Determines feasibility, analyzes end-user experiences and assesses long-term objectives and costs when devising solutions. Talented in transforming detailed technical specifications into efficient, effective and quality designs. Collaborates well with teammates to complete technical projects on time and within budget.

Overview

13

years of professional experience

5

years of post-secondary education

3

Certifications

4

Languages

Work History

Design Cum Production Engineer

General System Engineering Sdn. Bhd

10.2021 - Current

Decreased in-house production issues by establishing and coordinating sub-contracting and outsourcing requirements and processes.
Created engineering documentation for manufacturing processes, equipment specifications and change notices.
Procured raw materials essential for supply chain by negotiating with supply chain vendors.
Applied lean manufacturing processes to enhance quality, reliability or cost-effectiveness.
Performed regular production studies and machine analysis to identify any quality and process problems. i.e Laser Cutting, Shearing, Bending, Rolling and welding.
Practiced lean principles, which led to improvements in workflow and quality and waste reduction.
Communicated with other team members to enhance process and performance.
Analyzed product and process and provided actionable solutions for changes to processes, products or quality standards.
Investigated and proposed corrective actions for quality issues.
Determined root causes of failures and recommended changes in designs, tolerances or processing methods.
Reviewed product designs for manufacturability or completeness.
Conducted trials to determine equipment and machine performance capabilities including trouble shooting.
Supervised entire production process and prepared proper documentation and drawings for dispatch.
Read and analyzed machine layout and project documentation to develop workflows and strategy.
Calculated energy savings to promote environmental sustainability and energy conservation to meet aggressive project LEED requirements.
Completed mechanical designs for HVAC, air control, fire protection and elevators while providing SME input to client and design teams.
Tested feasibility, design, operation and performance of equipment, components and systems.
Performed analysis on technical designs and prototypes in development stage.
Perform structural stress analysis on mechanical designs and prototypes in development life cycle.
Collaborated with clients, standard parts suppliers, engineers,operators, and sub-consultants on projects with budget up to MYR 30 million.
Designed about 4 dipping line machinery successfully, overseeing production processes from conception to completion.
Created CAD models and detailed fabrication drawings for machinery designs.
Created parts for machining, sheet metal fabrication and laser cutting.
Brainstormed with product designers to implement and refine new manufacturing processes.
Collaborated with electrical and service teams to develop and implement product improvements to enhance performance.
Checked design compliance with product specifications and standards requirements.
Drew up layout for machinery designs, outlining mechanical project scopes, specifications and special details.
Designed ventilation systems for cleanrooms and general manufacturing facilities.

Mechanical Design Engineer

Packaging Sales & Services Sdn. Bhd

08.2020 - 09.2021

Performed analysis on technical designs and prototypes in development stage.
Analyzed previous mechanical designs and prototypes in development cost saving and life cycle.
Collaborated with clients, engineers, welders, and sub-contractors on projects.
Created CAD models and detailed fabrication drawings for F&B packaging line designs.
Tested models of alternate designs and processing methods to assess feasibility and operating condition effects.
Supported engineering design development through analysis and simulation of prototypes and 3D computer models.
Brainstormed with product designers to implement and refine new manufacturing processes.
Collaborated with production teams to develop and implement product improvements to enhance performance east of installation and maintenance.
Stayed up-to-date on industrial conveyors markets to effectively adapt designs and stay ahead of curve for best-in-class products.
Drew up layout for process flow designs, outlining machinery specifications and special details.

Production Technical Engineer

Shin Etsu Polymer (M) Sdn. Bhd

03.2018 - 08.2020

Executed troubleshooting and solutions support in both in-person and remote situations.
Provided secondary training to personnel struggling with technological tools and systems.
Designed system enhancements for assets within polymer molding industry operations.
Provided technical support in both productions and quality control and assurance.
Oversaw quality assurance management and offered suggested recommendations.
Wrote instruction manuals and technical guidance for preventive maintenance of car wiper and rubber contact production lines.
Produced reports on success rates and remedial requirements.
Monitored ongoing technical compliance with applicable laws and regulations.
Authored technical guidance explainers and whitepapers on systems for use by senior leadership.
Identified and corrected system faults to minimize operational system downtime and product faulty.
Solicited commissions for technical advisory contracts within polymer product production lines industry.
Diagnosed malfunctions in production machinery and equipment, directing support tickets to appropriate personnel for remediation.
Wrote work orders, accounting for standard budgeting guidelines and operational parameters.
Performed scheduled service work, installations, testing and repairs.
Monitored,evaluated and reported engineering performance to recommend improvements.
Developed comprehensive engineering documents for intra department reference.
Collaborated with other departments to facilitate successful improvements project completion and to extend application for future projects.
Conducted technical evaluations of engineering designs and test results.
Led engineering teams to successfully complete improvement projects on time and within budget.
Analyzed and interpreted data to identify trends and recommend improvements.
Developed and implemented procedures to verify compliance with Japan, Germany and US engineering standards.
Implemented automated systems to improve accuracy and efficiency of engineering processes.
Assisted in developing cost-effective solutions to engineering problems.
Trained and mentored junior engineers, providing guidance and direction.
Analyzed and interpreted productiont requirements to develop engineering solutions.
Created detailed reports on engineering activities and findings.
Conducted research to identify and evaluate new technologies and concepts.

Part Time Uber and GRAB Drivers

Uber And GRAB Malaysia

10.2014 - 05.2017

Coordinated efficient routes to avoid delays and optimize schedules.
Completed routine pre- and post-trip inspections to evaluate vehicles and assess maintenance needs.
Cleaned and maintained vehicle and assessed vehicle for damage after each shift.
Delivered goods and products to customer on time and in excellent condition.
Kept detailed mileage and fuel reports to track overall fuel costs.
Achieved consistent safety targets by adjusting driving to different road and traffic conditions, balancing loads, and avoiding dangerous driving actions.
Communicated with passengers to provide information and assistance for excellent customer service and positive experiences.
Utilized GPS and other navigation tools to plan routes and stay on schedule.
Followed all relevant traffic laws and safety regulations.
Maintained professional and friendly demeanor during deliveries to uphold company reputation.
Inspected vehicle before and after trips to identify maintenance needs and handle regular upkeep.

Laundry Services and Driver

D' Putra Agency

07.2017 - 02.2018

Coordinated efficient routes to avoid delays and optimize schedules.
Achieved consistent safety targets by adjusting driving to different road and traffic conditions, balancing loads, and avoiding dangerous driving actions.
Delivered goods and products to customer on time and in excellent condition.
Kept detailed mileage and fuel reports to track overall fuel costs.
Completed laundry services with special attention to care instructions for hand-washing and dry cleaning.
Provided housekeeping and laundry services for Tok Aman Bali Resort in Kelantan.
Executed plumbing services in tight quarters and easily bent, squatted, crawled, climbed and reached.
Troubleshot technical issues related to products and services.

Internship Student

MGV Sdn.Bhd

06.2016 - 08.2016

Reported back to maintenance engineer to receive day-to-day tasks and responsibilities.
Delivered clerical support by handling range of maintenance routine and special ad-hoc requirements.
Sorted, organized, and maintained files.
Interacted with customers by phone, email, or in-person to provide support service information.
Communicated effectively with faculty and staff and accepted critiques and suggestions for areas of improvement.
Completed research, compiled data, updated spreadsheets, and produced timely reports.
Analyzed compressor problems and worked with teams to develop solutions.
Provided project progress updates and proposed solutions to issues.

Rubber Tapping

Family Owned Plantation

12.2010 - 07.2011

Developed and maintain effective tapping to avoid tree damages
Worked flexible hours across night, weekend, and holidays
Organized and detail-oriented with a strong work ethic to meet target.
Adaptable and proficient in learning new concepts quickly and efficiently.
Design a cover to shield the collected non coagulated latex from unexpected rain.
Demonstrated creativity and resourcefulness through the development of innovative solutions.
Maintain work environment safety by regularly grazing and cleaning the plantation.
Strengthened communication skills through regular interactions with others.

Education

Bachelor's of Mechanical Engineering - Materials, Manufacturing And Mechanical

University Of Nottingham Malaysia Campus, Semenyih, Selangor

08.2014 - 07.2017

Mechanical Engineering - First Year Mechanical Engineering

Imperial College London, Knight Bridge, United Kingdom

09.2013 - 05.2014

A Level - A Level in Engineering

Kolej Tuanku Ja'afar, Mantin, Negeri Sembilan, Malaysia

08.2011 - 07.2013

Skills

Workflow Streamlining

Failure Analysis

Process Automation

Root Cause Analysis

3D Models

AutoCAD Proficiency

Basic Maintenance

Quality Assurance

Computer-Aided Design

Computer-Aided Manufacturing

Sketches, Specifications, and Drawings

5S Methodology

Technical Troubleshooting

Cost Reduction

Finite Element Analysis

Industrial Automation

Process Enhancement

ISO Standards

Accomplishments

Awarded 2 Silvers, 3 Golds and 2 Specials for Kaizen Teian in Continuous Improvement.

Software

SolidWorks

Inventor

AutoCad

Creo

Microsoft Office

Certification

Certified SOLIDWORKS Sheet Metal Course, [Company Name] - [Timeframe]

Timeline

Certified NESTINGWorks Course

09-2023

Licensed Personel Binaan - Valid Thru 04/28

07-2023

Certified SOLIDWORKS Sheet Metal Course, [Company Name] - [Timeframe]

11-2022

Design Cum Production Engineer - General System Engineering Sdn. Bhd

10.2021 - Current

Mechanical Design Engineer - Packaging Sales & Services Sdn. Bhd

08.2020 - 09.2021

Production Technical Engineer - Shin Etsu Polymer (M) Sdn. Bhd

03.2018 - 08.2020

Laundry Services and Driver - D' Putra Agency