Zeiss Calypso
THARANHI GANESAN
QAQC Engineer
Port Klang,10
Summary
Tharanhi D/O Ganesan holds a Diploma in Mechanical Engineering (Petrochemical) and gained knowledge in safety and health during her polytechnic studies. Her practical experience includes operating lathe, milling, and grinding machines, along with proficiency in AutoCAD, P&ID, and FluidSIM drafting systems. She has hands-on experience maintaining various mechanical components like pumps, valves, and heat exchangers, and possesses excellent MS Office skills. Describing herself as punctual, ambitious, confident, friendly, and responsible, Tharanhi has 5 months of real plant machine maintenance experience and understands related safety procedures. As a DCC, she developed skills in document control and data handling using Excel formulas. In her 5 months as an AQE, she gained exposure to CMM and vision scope programming, jig calibration, creating work instructions, and reading machining processes. Tharanhi is described as a process quality engineering professional adept at driving quality initiatives, ensuring compliance, and collaborating cross-functionally for process improvements. Energetic and analytical with problem-solving and process optimization skills, she applies engineering principles to enhance manufacturing processes and seeks to transition into a new field, leveraging her strengths in problem-solving and collaboration. Overall, she is an engineering professional with a proven ability to optimize processes, improve production efficiency, and deliver results through teamwork and skills in process design and quality control.
Overview
4
4
years of professional experience
1
1
Certificate
3
3
Languages
8
8
years of post-secondary education
Work History
QAQC Engineer
Joon Hee Engineering SDN BHD
Port Klang, Selangor
11.2024 - Current
- Programmed Coordinate Measuring Machines (CMM).
- Determined and implemented appropriate measurement methods.
- Prepared Production Part Approval Process (PPAP) documentation.
- Conducted Statistical Process Control (SPC) analysis and prepared related documentation.
- Prepared Corrective Action Reports (CAR).
- Optimized processes to ensure consistent product quality and minimize defects.
- Implemented and maintained quality control procedures and systems.
- Monitored and tracked key quality metrics to identify trends and areas for improvement.
- Analyzed existing processes to identify areas for improvement and potential bottlenecks.
- Investigated and resolved quality issues and defects.
- Identified root causes of problems and implemented corrective and preventive actions.
- Documented findings and recommendations for process improvements.
- Prepared and maintained quality documentation, including procedures, reports, and records.
- Communicated findings and recommendations to relevant stakeholders.
- Provided training to production staff on quality procedures and best practices.
- Supported production teams in identifying and resolving quality issues.
- Ensured processes and products comply with relevant industry standards and regulations.
- Stayed updated on changes in quality standards and regulations.
- Developed, optimized, and improved manufacturing processes to enhance productivity, quality, and safety.
- Identified and implemented process improvements to reduce costs, minimize waste, and increase efficiency.
- Collaborated with cross-functional teams to ensure smooth integration of new processes, technologies, and equipment.
- Monitored and analyzed process data, identifying trends and proposing solutions for continuous process improvement.
- Performed process capability studies, statistical analysis, and data-driven decision-making to achieve operational excellence and meet production targets.
- Gained experience in reading machining and casting drawings and interpreting them into CMM, IM, or PP programs.
- Developed skills in problem-solving, 4MIE analysis, and report generation.
- Implemented changes to work instructions based on audit findings, enhancing overall system effectiveness.
- Reviewed and approved engineering change requests, ensuring that modifications maintained product quality and conformed to project specifications.
- Improved product quality by implementing rigorous QAQC processes and procedures.
- Supported process improvement initiatives, resulting in higher product reliability and reduced costs.
- Increased accuracy of test results by calibrating instruments and equipment regularly, maintaining proper functioning throughout projects.
- Reduced production errors by conducting root cause analysis and implementing corrective actions.
- Facilitated internal audits to assess compliance with company policies and procedures, uncovering areas for improvement and ensuring alignment across departments.
- Conducted thorough inspections for adherence to project specifications, resulting in reduced defects and increased customer satisfaction.
- Performed statistical data analysis to identify trends in product performance, informing future design improvements.
- Enhanced team performance with continuous training on industry best practices and new technologies.
- Streamlined project timelines by coordinating closely with cross-functional teams to ensure timely completion of deliverables.
- Reviewed and approved quality requirements for purchase orders and engineering specifications to meet contract compliance.
Asst. Quality Engineer
JH Aluminium Product (M) SDN BHD
04.2024 - 10.2024
- I have learned about defects on aluminium that will occur after extrusion processes
- I have learned to overcomes the defects on aluminium
- I have learned on doing visual inspection and dimension inspection
- I have gained experience in programming vision scope and Coordinates
- Measuring Machine to take measurements
- I have also worked through the visual inspection department and made report of the rejection data
- I have done one point lesson, quality alert and quality standards
- I have also prepared PPAP and FA to submit to the customer side
- I have also Prepared Work Instructions for equipments
- Usage and every process in the factory
- I have also done PPAP for new parts
- I have done Quality check sheet for outgoing, incoming and inprocess
- I Have explored more on excel
- I have also done summary of parameters for MC
Document Controller
Crest Builders SDN BHD
Port Klang, Selangor
10.2023 - 03.2024
- Scanned, filed and transmitted various documents and adhered to digital filing procedures.
- Monitored due dates and deadlines and worked to submit all documents on time or early.
- Checked accuracy and completeness of documents to identify deficiencies and recommend corrective actions.
- Carefully reviewed all documents and reports for completeness and accuracy.
- Coordinated document exchange between departments, contractors, suppliers, and customers.
- Ensured timely submission of project documents by closely monitoring deadlines and prioritizing tasks accordingly.
- Demonstrated adaptability by quickly learning new software platforms and adjusting processes as needed to accommodate evolving project requirements or client preferences.
- Enforced use of standardized forms and templates to achieve uniformity of communications across departments and functions.
- As the primary contact for supplier inquiries, I attentively addressed incoming calls, resolving an average of 10-15 issues per day, contributing to smooth procurement operations.
Maintenance Technician Intern
Sekoplas Plastic Industries
Klang, Selangor
01.2023 - 06.2023
- I have gained experience in performing macine maintenance such as changing spoiled motors, ficing rollers, changing belts, changing pulley bearings, changing pulleys, changing machine servos, changing sprockets, changing chain, changing bearing, chaning knife for machine and setting machine servos
- I also gained experience in performing preventative maintenance for machines
- Complied diligently with safety regulations during all phases of repair work, minimizing accidents or injuries on site.
- Enhanced customer satisfaction levels by providing timely response to maintenance requests and ensuring a thorough resolution of identified issues.
Cashier
Econsave Cash & Carry SDN BHD
Klang, Selangor
05.2021 - 09.2021
- Counted money in cash drawers at beginning and end of shifts to maintain accuracy.
- Welcomed customers and helped determine their needs.
- Resolved customer complaints professionally, leading to improved customer relations and loyalty.
- Assisted customers with returns, refunds and resolving transaction issues.
- Enhanced customer satisfaction by providing efficient and accurate cash transactions.
- Addressed customer needs and made product recommendations to increase sales.
- Restocked and organized merchandise in front lanes.
Education
Bachelor of Science - Chemical Engineering
UNIKL MICET
Alor Gajah, Melaka, Malaysia 10.2024 - Current
Diploma - Mechanical Engineering (Petrochemical)
Politeknik Tun Syed Nasir Syed Ismail
Pagoh, 01 01.2020 - 01.2023
Sijil Pembelajaran Malaysia - Science
Sekolah Menengah Kebangsaan (P) Raja Zarina
Port Klang, 10 01.2015 - 01.2019
Skills
Professionalism
undefinedAccomplishments
- Achieved creating CMM programme by completing PMI measurements with accuracy and efficiency.
- Used Microsoft Excel to develop inventory tracking spreadsheets.
Software
PDMIS
Certification
CMM Training - 2days
Interests
Involving in production and process development
Exposed to customer and supplier
Learn more techniques to overcome critical problems
Timeline
QAQC Engineer
Joon Hee Engineering SDN BHD
11.2024 - Current
Bachelor of Science - Chemical Engineering
UNIKL MICET
10.2024 - Current
Asst. Quality Engineer
JH Aluminium Product (M) SDN BHD
04.2024 - 10.2024
Document Controller
Crest Builders SDN BHD
10.2023 - 03.2024
Maintenance Technician Intern
Sekoplas Plastic Industries
01.2023 - 06.2023
Cashier
Econsave Cash & Carry SDN BHD
05.2021 - 09.2021
Diploma - Mechanical Engineering (Petrochemical)
Politeknik Tun Syed Nasir Syed Ismail
01.2020 - 01.2023
Sijil Pembelajaran Malaysia - Science
Sekolah Menengah Kebangsaan (P) Raja Zarina
01.2015 - 01.2019
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Work Preference
Work Location
On-SiteRemoteImportant To Me
Career advancementWork-life balanceCompany CulturePaid sick leaveHealthcare benefitsPersonal development programsTeam Building / Company RetreatsLanguages
ENGLISH
MALAY
TAMIL
Quote
Even if you are on the right track, you’ll get run over if you just sit there.
Will Rodgers
Rewards
- Dean List, 06/01/20, 12/01/20, 06/01/21, 06/01/22
- The Best Student, 2018, 2019
- Pingat Ketua Jabatan for Diploma
References
Mohammed Zaki
Senior Quality Engineer
010-377 8839
Sim Boon Keong
Project Manager
012-204 0128
Similar Profiles
Stephy LauStephy Lau
Senior Accounts cum HR cum Admin Executive at Ding Hee Raub Musang King (M) Sdn. Bhd.Senior Accounts cum HR cum Admin Executive at Ding Hee Raub Musang King (M) Sdn. Bhd.
Shi Wei LauShi Wei Lau
Account, Admin & HR Executive at Ding Hee Raub Musang King (M) Sdn BhdAccount, Admin & HR Executive at Ding Hee Raub Musang King (M) Sdn Bhd
MUHAMMAD FIRDAUS CHE ABDUL HAMIDMUHAMMAD FIRDAUS CHE ABDUL HAMID
Site Engineer at CFS VISION ENGINEERING SDN BHDSite Engineer at CFS VISION ENGINEERING SDN BHD