Summary
Overview
Work History
Education
Skills
Timeline
Generic
SRI. GANESH

SRI. GANESH

Project Engineer
Butterworth

Summary

Proficient Project Engineer with 5 years of experience driving over 4 projects to completion. Skilled in overseeing technical staff and checking that projects are completed on schedule, within budget, and according to specifications. Skilled in assessing and mitigating risk with proactive and strategic approaches.

Overview

5
5
years of professional experience
39
39
years of post-secondary education
4
4
Languages

Work History

Project Engineer

Deaxo
02.2025 - Current
  • Provided technical expertise throughout all phases of the project, ensuring accurate execution of designs and specifications.
  • Maintained records for each project and engineering discipline.
  • Monitored installation of materials and equipment for compliance with drawings and specifications.
  • Completed construction tasks while providing safe working conditions, staying on budget and meeting project deadlines.
  • Lead engineer for Infineon new K3.2 expansion and Schott Glass hookup expansion
  • Evaluated Feath Group GC design for Infineon Dresden,Germany project

Air Separation Unit and Bulk & Specialty Gas Engineer

Intel Corporation
01.2022 - 01.2025
  • Coordinate and participate in Pelican ASU Design Review -Manage the Linde Operations team for Pelican ASU, Bulk gas and Spec gas team
  • Involved in pre-test plan and commission plan for the performance test for LIN, LOX, and LAR tank (Backup molecule support)
  • Managed cost savings for ASU around 10K NM3 sold without affecting contract obligations
  • Involved in ASU1 & ASU2 MAC Motor Energization & Utility cost saving for ASU by implementing LMPC
  • Coordinated safe work JSA for Cold box lift
  • Executed UN2 skids commissioning and analytical support
  • Drafted procedure & supervised the personnel onboard for the Purifiers Swap for SAES Argon Getter Purifier, He and O2 Cannister type purifier
  • Validate the FASTR (capacity management) for Bulk Gas
  • Participated HAZOP study for ASU 1 and ASU 2
  • Register for Pelican (approximately 58 chemicals) with EHS
  • LOPA study for gas yard design for Silane and H2 system
  • Prepared difference in Purifier spec from Integris as per the Purifier utilized at Pelican and purifier utilized at Ronler Acre
  • Verified and validate Pipe flo design for HPN2, HPAr, HPHe, HPO2 and HPH2 system
  • Executed proper fittings and track weld records for gas system
  • Ensured high purity trailers are utilized for feeding the fab for any ad-hoc projects
  • Monitored the design are meant as per piping standards of Intel IMDS
  • Ensured proper PPE are equipped for Specialty Gas Personnel operations team
  • Verified the Exhaust design for Spec Gas is design based on a standard safety requirement
  • Ensured proper purge panels are designed for each TT
  • Participated with ALF (Air Liquide France) on site Spec Gas cabinet FAT
  • Verified the quality of the orbital welding for high purity gases
  • Ensured redundancy availability for each gas supply

Plant and Production Engineer

Air Products Malaysia
01.2021 - 12.2022
  • Troubleshoot and improve LAR (Liquid Argon) recovery at Prai 3 & Prai 2
  • Execute and coordinate NDT and UT Inspection for Bayan Lepas, Prai 2 & Prai 3
  • Monitor and improvise the daily production cost VTP for LIN, LOX and LAR production
  • Prepare RCA on Plant trip, Plant incident
  • Calculated and provided as per ASME standard and AIGA 056/14 for cryogenic plant
  • Calculate the head loss to determine the pump installation for customer pipeline
  • Assisted pump automation start and off logic sequence
  • Assisted and troubleshoot to restore the equipment's functions: eg- Prai 3 PPU Regen Heater Ohms reading was low and tripped the whole plant
  • Investigate and restored back LAR recovery
  • Improvising side-arm ratio for Distillation Column
  • Provide P&ID markup for Prai 2, Prai 3 and Bayan Lepas plant turnaround
  • Execute scheduled waste disposal for Prai 2 and Prai 3 and arrange with vendor
  • Competent person for schedule waste handling for Prai 2 & Prai 3
  • Prepare Standard Operating Procedure (SOP) for operators on alarm triggered
  • Involved in the plant start-up- Nitrogen gas plant at Bayan Lepas
  • Prepare and coordinate with state Safety regulations regarding their equipment's standard requirements
  • Coordinate to prepare backup supply for customer at any time
  • Managed to save company yearly expenditure around RM 3K by coordinating new schedule waste disposal vendor (FOC for spent oil disposal)
  • Certified ISO 14001 and 45001 personnel
  • Person In Charge (PIC) to eliminate nuisance and standing alarm in Prai 2 & Prai 3 & Bayan Lepas
  • Coordinate and follow up closely for THC analyzer installation at Prai 3 & N2O analyzer
  • Investigate the Event Management (EM) and close the reports
  • Certified Safety Work Permit (SWP) Issuer & IRR (Isolation Required Review) for AOV
  • Maintained all machines and equipment and handled the repairs
  • Handled root cause analysis, implementing corrective actions when necessary
  • Mentored new engineering and production team members
  • Oversaw production process and prepared proper documentation for dispatch
  • Compiled and submitted monthly and yearly reports
  • Aided management decisions by estimating production times, staffing requirements and related costs
  • Collaborated with peers to enhance the engineering process and boost performance

Quality Engineer

Toray Group
01.2020 - 01.2021
  • Able to operate the machines - (Tensile Machine, SEM, DSC, Haze machine, Friction coefficient machine, Refractive Index machine, Heat Shrinkage machine, Edge tearing machine & Breakdown Voltage machine, Surfcorder (RA), 3D RA & other equipment's at Film Department) -Prepare SOP and SOI for QMS (Quality Management System) and update accordingly
  • Coordinate manpower within department for technical request on special Film
  • Closely follow up with production lines for daily routine inspection
  • Execute internal audit & report closing for Non-conformance issue in another department
  • Prepare documentation for Internal Audit (ISO 9001:1) & SIRIM audit - Prepare Certificate of Analysis (COA) for customers

Education

Master of Science - Environmental Science, Industrial Technology

University Science Malaysia
Penang
04.2001 - 01.2024

Industrial Chemical Process

University Malaysia Perlis
04.2001 - 01.2018

Skills

Project management

undefined

Timeline

Project Engineer

Deaxo
02.2025 - Current

Air Separation Unit and Bulk & Specialty Gas Engineer

Intel Corporation
01.2022 - 01.2025

Plant and Production Engineer

Air Products Malaysia
01.2021 - 12.2022

Quality Engineer

Toray Group
01.2020 - 01.2021

Master of Science - Environmental Science, Industrial Technology

University Science Malaysia
04.2001 - 01.2024

Industrial Chemical Process

University Malaysia Perlis
04.2001 - 01.2018
SRI. GANESHProject Engineer