Nur Diyana Syazni Sharin
Manufacturing Engineer
Tasek Glugor, Penang,07
Summary
I am a self-motivated, ambitious person who has developed a mature and responsible approach to any task that I undertake, or situation that I am presented with. With a creative, adaptable nature and an eye for detail I aim to pursue my passion for engineering in a team where I can work collaboratively with others towards an objective of professional excellence, for a dynamic and fresh.
Top-notch Manufacturing Engineer with proven expertise in designing and developing manufacturing processes, equipment and layouts. Skilled in troubleshooting with strong knowledge of lean manufacturing principles. Adept at using statistical process control and quality control methods to improve production.
Overview
5
5
years of professional experience
6
6
years of post-secondary education
Work History
Manufacturing Engineer
First Solar
05.2022 - Current
- Developed technical documentation, including standard operating procedures, work instructions, and engineering drawings to support manufacturing operations.
- Trained and mentored junior engineers, fostering a culture of continuous learning and professional development within the team.
- Used lean manufacturing principles to develop, evaluate and improve manufacturing methods.
- Collaborated with cross-functional teams to develop innovative solutions for complex engineering challenges.
- Led Kaizen events focused on continuous improvement within various areas of the manufacturing environment.
- Identified problems and specific resolutions to fix defective, damaged, or malfunctioning parts, assemblies, equipment and systems.
- Conducted root cause analysis on defective products, leading to targeted improvements in manufacturing processes.
- Identified and matched potential suppliers by applying automated enabling technologies tools for Advanced Logistics and information processing to procure obsolete or hard to find parts.
- Improved manufacturing efficiency by streamlining production processes and implementing lean methodologies.
- Reviewed products for compliance with Design for Manufacturing (DFM) requirements.
- Contributed to achieving safety targets by proactively addressing potential hazards and promoting a strong safety culture throughout the facility.
- Reduced production downtime through proactive maintenance scheduling and timely equipment repairs.
- Provided engineering support during new product launches, coordinating efforts between design, production, and quality control teams.
- Managed manufacturing projects and program services to handle engineering and project metrics.
- Established and coordinated sub-contracting and outsourcing requirements for machining and processes to overcome in-house production issues.
- Assisted in supplier selection and evaluation processes, contributing to improved supply chain performance.
- Designed and built process tooling, insert molds and arbor press tooling.
- Evaluated manufacturing equipment performance regularly, recommending upgrades or replacements as needed to maintain optimal efficiency.
- Managed supplier development efforts by creating statements of work and procedures, proposal preparation, projecting lead times, technical costs and budgets for engineering and parts production.
- Researched and tested design feasibility and operation of equipment, components and systems.
- Swapped out materials and finishes in product line to alleviate performance issues and reduce corrosion.
- Coordinated selection of manufacturing methods, fabrication, and operation of product designs.
- Selected manufacturing methods, fabrication and operations to develop and coordinate production.
- Performed daily department Layered Process Audits to maintain proactive control over automobile manufacturing process.
- Applied project management metrics and tools in oversight of engineering and manufacturing projects and program services.
- Optimized assembly line layouts to maximize productivity and improve overall workflow efficiency.
- Selected sustainable production materials in alignment with client budget parameters.
- Analyzed mechanical requirements to determine feasibility of design.
- Played an active role in the development of new manufacturing facilities, providing input on equipment selection, layout design, and capacity planning.
- Implemented cost-saving measures by identifying opportunities for reducing material waste in the production process.
- Identified appropriate methodology to shorten cycle time and achieve target margins.
PROCESS ENGINEER
Teleflex Medical Sdn Bhd
01.2020 - 05.2022
- Currently as a Process Engineer in Latex Department at Teleflex Medical Sdn Bhd
- Task Mastered:
- Directed and controlled all activities so that the set production volume from each workstation is achieved during the shift
- Controlled all activities so that the desired level of quality as per assigned standard for the shift is achieved by ensuring all related procedure are being strictly adhered to
- Proactively deliver inputs and idea in team for problem solving
- Contribute tremendous idea for kaizen blitz and leads several Kaizen
- Understand and deliver idea in LUV and MUV reduction by handled several projects
- Leads Scrap reduction and Yield increasing from 92% to 95%
- Established Individual Performance Tracker for Inspection operator in order to reduce LRR failure
- Establish CLIT program for machines in the Cleanroom
- Investigate and rectify the failure
- Leads CAPA 193: Mixed balloon size of catheters
- Perform validation for Software, New Machines, New Product and Test Method
- Perform failure analysis
- Perform several PFMEA
- Received and responded to Non-Conformance and Customer Complaints
- Fully trained and understand Lean Manufacturing.
Education
BACHELOR of POLYMER ENGINEERING (HONORS) -
Universiti Sains Malaysia
01.2015 - 04.2019
MATRICULATION - undefined
Kolej Matrikulasi Teknikal Pendang Kedah
01.2014 - 04.2015
Skills
Creativity
Team Working
Communication Skill
Problem Solving
Transferable Skill
Management
Laboratory Skills
Autocad
Solid Work
Microsoft Office
MiniTab
Maintenance Planning
Process Improvement
Technical Support
Manufacturing Processes
Computer-Aided Design
Material Selection
Waste Reduction
Production Scheduling
Production Planning
Cross-Functional Teamwork
ISO Standards
Risk Assessment
5S methodology
Manufacturing Resource Planning MRP
Production Monitoring
Failure Modes and Effects Analysis
Total Productive Maintenance
Continuous Improvement Methods
Equipment Installation
Process Requirements Validation
Environmental Sustainability Practices
Written Communication
Documentation
Microsoft Visual Basic
5S organization
Bill of Material (BOM)
Root Cause Analysis
Organizational Skills
Analytical Skills
Task Prioritization
Excellent Communication
Lean Manufacturing
Sponsor
PTPTN
Cgpa
3.67
Personal Information
- Date of Birth: 07/31/96
- Nationality: Malaysian
Taskmastered
- Directed and controlled all activities so that the set production volume from each workstation is achieved during the shift.
- Controlled all activities so that the desired level of quality as per assigned standard for the shift is achieved by ensuring all related procedure are being strictly adhered to.
- Proactively deliver inputs and idea in team for problem solving.
- Contribute tremendous idea for kaizen blitz and leads several Kaizen.
- Understand and deliver idea in LUV and MUV reduction by handled several projects. Leads Scrap reduction and Yield increasing from 92% to 95%.
- Established Individual Performance Tracker for Inspection operator in order to reduce LRR failure.
- Establish CLIT program for machines in the Cleanroom.
- Investigate and rectify the failure.
- Leads CAPA 193: Mixed balloon size of catheters.
- Perform validation for Software, New Machines, New Product and Test Method.
- Perform failure analysis.
- Perform several PFMEA.
- Received and responded to Non-Conformance and Customer Complaints.
- Fully trained and understand Lean Manufacturing.
Languages
Malay
Proficient
C2
Chinese
Elementary
A2
English
Proficient
C2
Awards
- 2nd Runner Up Entrepreneur Competition. State Level Competition, Sponsored by the Suruhanjaya Koperasi Malaysia.
- Best Innovative Recycled Polymeric Material Design Awards for providing graphic design support to both industrial employees and students from other universities
- Asia Petrochemical Industry Conference 1st Runner Up student program during this conference with SelfHealing Elastomer.
References
- Shafarin Shafie, Manager- Engineering Manufacturing MYS • MFG ENG & MES, First Solar Sdn. Bhd, +6012-4056374, shafarin.shafie@firstsolar.com
Accomplishments
- Collaborated with team of 205 members in the development of BiFi Conversion.
- Documented and resolved high cycle time which led to shorter cycle time improved throughput.
- Used Microsoft Excel to develop inventory tracking spreadsheets.
Timeline
Manufacturing Engineer
First Solar
05.2022 - Current
PROCESS ENGINEER
Teleflex Medical Sdn Bhd
01.2020 - 05.2022
BACHELOR of POLYMER ENGINEERING (HONORS) -
Universiti Sains Malaysia
01.2015 - 04.2019
MATRICULATION - undefined
Kolej Matrikulasi Teknikal Pendang Kedah
01.2014 - 04.2015