Mohd Zaidi Hashim

• Preparation of project documentation of Quality
• Reporting metrics and statistics on quality related issues
• Verify that all quality related activities are in accordance with codes and standards
• Responsible for preparing Quality Plan that supports the project and clients’ requirements on quality assurance and quality control
• Ensure that non-conforming project activities including potential nonconformances are identified and resolved through approved quality procedures
• Provide independent quality control audit of
• Client vendors/contractors and sub-contractor
• Ensure all Contractors’ QA/QC control measures and procedures are documented, implemented and auditable and fully comply with all Client and regulatory agency requirements
• Preparation of NDT Plan, NDT Procedures and related
• Documents with reference to Codes, standards and project specification
• Responsible for all field inspections and coordination of inspection activities to ensure the quality level
• Maintaining the quality assurance records and execution of periodic inspection on job
• Controlling the activities of QC Inspectors/ coordinators and giving proper instructions to them
• Ensure that the QC inspection work proceeds in accordance with project quality plan, control procedures and inspection procedures
• Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of all Quality Records
• Assesses the implementation of the project Quality Plan
• Allocates Quality Control personnel to the various areas and shifts for barge construction activities
• Supervises inspections, reports and the documentation issued by inspectors and collect and file the required Quality
• Records
• Ensures the correct application of Quality Control phases for construction
• Daily functional reporting on his responsibilities and any quality issues to assigned Project Manager
• Arranges in coordination with Project Manager, and site personnel procedures, manuals and report
• To confirm by countersign as applicable, that all sites activities are carried out according to referenced documentation
• Raises Corrective Action/Non-conformance reports as required and monitors their development and resolution, in conjunction with PQMP
• Manages collaboration and measuring instruments and related certifications.

• AS E&I
• Ensure that personnel comply with HSE guideline as priority and are adequately qualified to execute work assignments and job instructions, potential hazards are immediately addressed
• Responsible for the supervision of Electrician, Technician in their daily activities and during the construction periods
• Preparation of Various activities during the development and execution of Project
• Validate the electrical test sheets into Project Commissioning database
• Directing the completion team with closeout activities for mechanical completion dossiers and do progress reporting for the Commissioning activities
• Directing the completion team with close out activities for Mechanical Completion Dossiers and do progress reporting for the commissioning activities
• Monitoring the work and liaising with the client in conjunction with the project management team
• Determine material specification, supervise, witness and accept the subcontractor and vendors scope of work
• Issue site technical queries for electrical discipline
• Review and follow up the commissioning as-built with interface implications
• Endorse all sub system commissioning dossiers at hand over stage for each discipline
• Attend FAT – Factory Acceptance Test of each equipment bought such as LV Motor Control
• Switch Gears, Panel etc as per Plan Approval
• Daily of Monitoring of site work to ensure that production is carrier
• Out in accordance to industry codes, Regulation & Standards, Contract Requirement, the standards of workmanship and the quality of the installation comply the requirement
• Monitoring & Supervision of Subcontractors during early stage of cable tray installation
• Cable pulling, Glanding and termination, and Instrument/Electrical Panel Installation
• Installation of New (Instruments) replacement, Loop Checking and Commissioning of newly
• Instrument
• Monitor weekly performance of the site construction teams against planning schedule and procedure weekly progress report including implementation of recovery action plan to recover unsatisfactory progress
• 
  

*** EPCC RAPID PLANT CHANGE, RFCC 1311 Water Wash Jumper Line

- Discipline ( Piping, Instrument, Electrical )

• Client, Review contract documents and specifications to determine Project Quality System requirements
• Monitor quality activities performed by QC Inspectors
• Review Material Verification Report (MVR), Fit Up Report & Visual Inspection Report
• Ensure that all the welding and associated action are carried out by the welding specification relevant to the work being carried out
• Inspect fit-up conditions such as bevel preparation, bevel type, mismatch, root gap, root face, cleanliness & alignment according to specification acceptance criteria
• Review Welding Procedure Specification ( WPS ) and Welder Quality
• Managed budget allocation for QAQC activities, optimizing resource utilization while maintaining high-quality outputs.
• Review all the procedure related to piping activity
• Consult client on the Technical and Quality issue during the project period
• Prepare all QA/QC reports for Final Documentation

*** Project EPCC RAPID PLANT CHANGE, CDU Chemical Filmer Piping Installation

- Discipline ( Piping, Mechanical , Electrical, Instrument, Civil & Structure )

• Managed budget allocation for QAQC activities, optimizing resource utilization while maintaining high-quality outputs.
• Ensured alignment between quality objectives and business goals through strategic planning and goal setting within the QAQC department.
• Managed documentation related to QAQC activities, ensuring accuracy and accessibility for future reference.
• Collaborated with cross-functional teams to identify potential issues and develop corrective action plans.
• Streamlined QAQC processes, resulting in time and cost savings for the organization.

• EPCC RAPID PLANT CHANGE
• Rotary Lobe Pump Installation ( Piping, Instrument , Electrical
• Mechanical, Civil , )
• Client Pengerang Refining Company Sdn Bhd & Pengerang
• 
  

*** EPCC SOLAR 50Megawatt , RAPID Petronas

- Discipline ( Electrical, Instrument, Civil Structure )

• Preparation of project documentation including pre- commissioning and commissioning procedures
• Preparation of the project commissioning and start-up plan including detailed activities
• Work with engineers and vendors to align handover and commissioning activities
• Participate in workshops on design aspects that may assist In pre-commissioning, commissioning and start-up activities
• Coordinate and manage contractor and subcontractor activities associated with pre-commissioning and commissioning
• Work closely with the project planners and schedulers
• Coordinate vendor activities for commissioning
• Ensure hazard/risk analysis is performed before start of activities
• Coordinate start-up activities with project management, engineering, construction, HSE, contractors, facility operations, and start-up personnel
• Establish progress reporting systems for all phases of the commissioning and start-up of the facility
• Ensure the commissioning plan is in compliance with the appropriate external regulatory bodies ( SEDA)
• Liaise with construction management, the client and
• Vendors to ensure efficient and timely service
• Coordinate with the project manager as needed to collect required documentation for major milestones, project closeout
• Coordinate with the field construction staff with concern to completion walk downs, handover of start-up packages, and the development and closeout of all punch list items
• Coordinate with the Project Manager to understand and develop utility acceptance test procedures
• Responsible for ensuring successful tests, including practice testing
• Review and approve all quality control and commissioning documents

*** Repair Works at P-216A

- Discipline ( Piping, Mechanical, Civil Structure , Electrical, Instrument )

• Developed comprehensive training programs to ensure all team members were well-versed in QAQC protocols.
• Managed budget allocation for QAQC activities, optimizing resource utilization while maintaining high-quality outputs.
• Improved product quality by implementing rigorous QAQC procedures and standards.
• Enhanced team efficiency through effective communication and coordination of QAQC tasks.
• Managed documentation related to QAQC activities, ensuring accuracy and accessibility for future reference.
• Streamlined QAQC processes, resulting in time and cost savings for the organization.
• Performed root cause analysis to identify and resolve quality issues and defects.
• Inspected products and worker progress throughout production.

*** Pasir Gudang 1440 Megawatt CCGT Power Plant

- Discipline ( Electrical and Instrument )

• Managing overall pre-commissioning activities required to bring the project from Construction Completion to
• Mechanical Completion
• Together with the project HSE Coordinator, ensures rollout of HSE procedures
• Ensure that the Pre-Commissioning procedures are developed in accordance with best practices
• Procedures associated with Pre-Commissioning activities are rolled out and adopted by the Pre- Commissioning
• Team
• Ensure that the Pre-Commissioning schedule is developed in accordance with best practices
• Integration of the Pre-Commissioning schedule into the project schedule
• Ensure that Pre-Commissioning progress is in line with the project requirements by identifying any potential schedule delays and recommending mitigation actions
• Develop and issue monthly and weekly pre- commissioning progress reports
• Develop KPI’s related to Pre-Commissioning activities
• Communicate with other departments to address schedule and performance concerns
• Interface and communicate with Construction to obtain best practice and performance from the Construction and
• Commissioning team
• Ensure that system owners are assigned and that punching, hold and witness points are consistently applied
• Ensure the development and implementation of system handover plan
• Ensure smooth handover from construction to Pre-
• Commissioning
• Continuous review progress against plan and identify areas of concern
• Ensure efficient handover from Pre-Commissioning to Commissioning Team
• Assist Client and vendors during Commissioning and performance test

• Interface between Petronas, iU&I , other parties for merging all the process between other EPCC
• Instrument Pre-Commissioning activity for the RAPID
• Responsible to produce pre-commissioning procedure
• Responsible for pre-commissioning activity execution for Main Control Building for RAPID
• Responsible to witness and approve all control system pre-commissioning
• Monitored key metrics of commissioning team to meet performance expectations.
• Coordinated equipment testing schedules, ensuring timely completion without compromising quality or safety standards.
• Improved communication between stakeholders by establishing clear lines of responsibility throughout the commissioning process.
• Optimized resource utilization for various projects under management by prioritizing tasks based on criticality while maintaining focus on timeframes and deliverables.
• Developed comprehensive commissioning plans, ensuring successful execution and project handover.
• Enhanced project efficiency by coordinating with multidisciplinary teams to ensure timely completion of tasks.

*** Independent Deep Water Petroleum Terminal 2

- Discipline ( Electrical and Instrument )

• Executes the specific inspections on materials, equipment and construction/installation activities on site
• Issues the relevant Quality Records and, when necessary, writes and sends QC Manager non- conformances reports
• Checks cable laying and cable identification
• Performs all relevant loop checks
• Updates as built drawings
• Performs punch-listing operations
• Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system
• Performs visual inspections, dimensional test, checks rating and material for connection
• Performs tests of continuity, insulation resistance
• Calibrates instruments
• Checks installation of instruments
• Performs tests functional instruments
• Verify special processes and the relevant workers’ qualifications
• Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections
• Loop check, Function check, pre commissioning and commissioning all the activity related to DCS.
• Provided device testing for monitoring progress, and recording defects.
• Worked closely with operations and maintenance staff during the transition from commissioning to production, ensuring a smooth handover of systems.

• Instrument Commissioning activity related to DCS and process
• Worked with whole Commissioning team such as mechanical, electrical and instrument team accordingly
• Submit daily report and activities to Commissioning manager
• Worked with vendor for performance Test
• Provided detailed progress reports on commissioning activities to keep stakeholders informed throughout the project lifecycle.
• Worked closely with operations and maintenance staff during the transition from commissioning to production, ensuring a smooth handover of systems.

*** Manjung 5 Fast Track 3A 1000Megawatt Coal Fire

- Discipline ( Electrical and Instrument )

• Prepare MTO
• Schedule Preparation including subcontractor
• Pre planning and resources forecasting for engineering
• In charge of performances of subcontractor
• Manage project team resources and training
• Prepare QVD base on index list, follow by system and subsystem
• Worked with QA/QC department to create ITP
• JMS, Loop Folder
• Worked with HSE department to create
• HIRADC base on site and ITP
• Prepare cable schedule for all instrument type
• Testing and calibration of plant measurement circuits, pressure, temperature, flow, speed, position and vibration probes
• They also take a lot of time mainly because they form a major quantity of the plant instrumentation
• Plant DCS system (Boiler and BOP) testing, tweaking and commissioning
• Plant SCADA system (electrical switchgear control) testing and commissioning
• Testing (occasional calibration and replacement) of Plant field instrumentation
• Testing and commissioning of plant control valves (loop checking and ensuring proper feedback
• Testing commissioning of plant solenoid valves (proper operation and feedback
• Testing and commissioning of Plant MOV
• Commissioning of plant servo's
• Monitor all loop and calibration document for commissioning, area by area, sector by sector
• Monitor all loop and calibration document for commissioning, area by area, sector by sector
• Monitor sub system progress
• Monitor cable pulling and installation by subcontractor
• In charge on all BOP ( Balance of Plant for E & I )
• Manage 1 Engineer , 1 Supervisor and 24
• Technician for Loop Check activities, Pre
• Commissioning and Commissioning with Main contractor end TNB
• Liaise with vendor for all skid and vendor package for all Local Control Panel and PLC such as Water

*** GE Bentley Nevada Vibration Sensor BN3500

- Discipline ( Electrical and Instrument )

• Identified plans and resources required to meet project goals and objectives.
• Planned, coordinate all the work schedule for GE Power System and TNB for upgrade Vibration Sensor for Hitachi Hydro Turbine
• Prepare all the data sheet, drawing for subcontractor
• Monitored project performance to identify areas of improvement and make adjustments.
• Monitored progress against established goals, adjusting schedules and resources as needed to keep projects on track.
• Met project deadlines without sacrificing build quality or workplace safety.
• Established effective communication among team members for enhanced collaboration and successful project completion.
• Coordinated with cross-functional teams to resolve project issues and mitigate risks.
• Monitor progress and Profit & Loss for budget
• Commissioning all the system and PLC for BN3500

*** EPCC PROJECT FOR PHASE 9 EXPANSION TANK

- Discipline ( Electrical & Instrument )

• Preparation of Instrument package, collect all necessary project and vendor drawings including the limit of subsystem, details termination, loop, layouts and equipment list including in the ITR index
• Perform In-House walk downs and ensure that the construction work is carried out in accordance with the contract requirements and that the standard and quality of workmanship reflects as per company specs and code requirements
• Conduct joint field inspection with owner and subcontractor representatives for correctness of installation base on approved drawings and acceptable installation standards, mark up drawing for as built, prepare punch list reports, and coordinate punch list clearing, Perform In-
• House walk downs and ensure that the construction work is carried out in accordance with the contract requirements and that the standard and quality of workmanship reflects as per company specs and code requirements
• Do process reporting for commissioning activities
• Ensure all instrument device has been calibrate properly accordingly with data sheet
• Ensure all calibration device has valid certificate
• Checking that inspections and test are carried out and documented in accordance with the approved and quality plans
• Responsible for performance of instrument for testing and commissioning work
• Continuity check and megger for new drum and cable
• Testing and commissioning plant

*** Pengerang Independent Deep Water Terminal

• Perform all Instrumentation and Electrical loop check, Function check testing, Commissioning such as
• MOV, Motor, Pump, Ultrasonic Level Transmitter
• Tank Gauging System
• Trouble shoot, install, calibrate instrument
• Familiar with YOKOGAWA DCS
• Frequency Drive Unit for control speed and rpm for6kv pump motor
• Hot oil skid for burner
• Prepare loop check folder, data sheet, clear punch list
• Prepare QVD base on index list, follow by system and subsystem
• Worked with QA/QC department to create ITP, JMS
• Loop Folder
• Worked with HSE department to create HIRADC base on site and ITP
• Testing and commissioning all the instrument device, based on vendor package, PLC and system
• Worked with DCS engineer to perform all the AI/AO/DI/DO instrument loop signal
• Documented all processes carefully and delivered data sheets that offered all information for clients.

** Petronas Kimanis Power Plant Combine Cycle 300 Mwatt

• Turbine Control system , testing , tweaking and commissioning
• Plant DCS system ( Boiler and BOP ) testing, tweaking and commissioning
• Testing ( occasional calibration and replacement) of Plant Field Instrument
• Testing and commissioning of plant control valves ( loop checking and ensuring proper feedback )
• Testing commissioning of Plant Solenoid valves ( proper operation and feedback )
• Testing and Commissioning of MOV
• Testing and commissioning of plant analyzers, In boilers, it will be PH, silica, conductivity, phosphate, SOx, NOx, CO, unburnt fuel and oxygen analyzers.
• Testing and commissioning of other plant systems, which do not form the part of typical turbine and DCS control
• Turbine and generator CO2 release system
• MCP ( manual call points ) system and associated auxiliaries
• Plant communication system
• Handle and finished all pre commissioning activity for
• BOP start from SAT prior to commissioning activity
• Worked with GE start from loop check until pre commissioning for Gas Turbine Generator 6FA including skid for Lube Oil, Gas Sector, Liquid Fuel compartment, Atomizing Air, Water Wash Skid, Load
• Gear, Generator unit
• Loop check and Pre commissioning for all instrument device for Gas Turbine Generator including Bentley
• Nevada Vibration probe and Speed Sensor
• Monitor all instrument calibration device by contractor
• Monitor report and calibration activity from contractor to full fill the Petronas and client requirement
• Worked with Project Instrument Engineer for construction progress to synchronize with commissioning activity
• Testing and Commissioning SANCO fire Alarm system for GTG ( Gas Turbine Generator )
• Manage all activity for Testing Commissioning and supervise all Instrument Technician
• Monitor all loop and calibration document for commissioning, area by area, sector by sector
• Assisted with development of instrumentation operating procedures and provided technical support.

*** Shell Hijau Project , Refinary Port Dickson

- Discipline ( Electrical & Instrument )

• Provided device testing for monitoring progress, and recording defects.
• instrument Calibration and Testing
• Loop Check and Commissioning
• Worked closely with operations and maintenance staff during the transition from commissioning to production, ensuring a smooth handover of systems.
• Coordinated with technical liaisons and construction team members to address technical issues for meeting project requirements.
• Managed escalations from direct reports during testing and commissioning phase of project.
• Assist Vendor for Skid Commissioning
• Liaise with main-contractor and Shell for Commissioning plan

*** Data Logger Pump Monitoring

• Supervised in servicing and calibration work on shutdown valve, blow down valve, on/off valve and control valve
• Prepared all spare part items for replacement such as body gasket, seat gasket, packing, o-ring, seat, plug, pressure gauge, air regulator, solenoid valve, proximity switch and limit switch
• Supervised and inspect valve after services and fill up related check sheet
• To plan works to completed as per shut down schedule