MOHD YUSOF ABDULLAH

· Project Management Team for MLNG New Boiler (MNB),MLNG Boiler Rejuvenation Project & MLNG Dua Rejuvenation Project (MDR)

· To ensure all work, tests and inspections undertaken by Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements

· Executes inspection on materials, equipment and construction/installation activities on sites Monitoring & supervising execution work at field, FAR and Control Room.

· Ensure all works completed according to plans and specifications for project.

· To supervise and to ensure on the installation of all CV/instruments were installed at the right place as designed.

· To performs all relevant loop checks.

· To perform visual inspections, dimensional test, checks rating and material for connection.

· Performs tests of continuity and insulation resistance on cables, calibrates and functional test on CV/instruments.

· To ensure the correct implementation of the approved Inspection Test Plan.

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering,Supply,Delivery,Installation,Inspection,Troubleshooting and Commissioning of all E&I materials needed for the New Boiler (MNB)&Boiler Rejuvenation Project (MBR).

· Project Management Team for MLNG New Boiler MLNG Boiler Rejuvenation.

· To ensure all work, tests and inspections undertaken by Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements

· Executes inspection on materials, equipment and construction/installation activities on sites.

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering, Supply, Delivery, Installation ,Inspection,Troubleshooting and Commissioning of all E&I materials needed for the YATAGUN BOOSTER COMPRESSION PLATFORM PROJECT.

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment.

· Exposed and involved with Hi-Pot test for new cable and transformers, function test, stroke test, calibration, Interlock Test, Motor Solo Run Test, Relay Test, Loop Test and Mechanical Run test.

· Laboratory works which consist of instrumentation, Programmable Logical Controller (PLC), digital and analogue circuits, digital and analogue communications, Pneumatic, Printed Circuit Board (PCB), microprocessor and microcontroller.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering, Supply, Delivery, Installation ,Inspection,Troubleshooting and Commissioning of all Telecommunication,E&I materials needed for the Bunga Raya Okid.

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment. Exposed and involved with Hi-Pot test for new cable and transformers, function test, stroke test, calibration, Interlock Test, Motor Solo Run Test, Relay Test, Loop Test and Mechanical Run test. Site Survey, installation, scanning Freq and commissioning of LongHaul 4Ghz, 5Ghz, 6Ghz, 7Ghz, 13Ghz, 18Ghz Microwave System for Radio. onshore, offshore, be able to objectively do a comprehensive site survey and other pre- installation requirements and be able to translate these information in technical report format, VHF Radio, UHF Radio, Repeaters, Canopy Wireless, PABX and Cisco data through Satellite and Fiber Optic PAGA System, HF-SSB, PABX, CCTV, LAN-Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Schematic Diagram interpretation for troubleshooting and repair.

· Highly competent in installation and commissioning of VSAT system

· which includes site survey, RFI test, Cross-pole, commissioning & trouble-shooting activities. Operationally competent in handling VSAT antenna system of 1.8m, 2.4m, 3.7 & 3.8m and off-shore Gyro auto-tracking antenna system, SeaTel & DMS.

· Highly competent in handling the operations of various Satcom equipments such as Antenna System, Radio Frequency Terminal (RFT), Satellite Modem, Block-up Converter (BUC) and Multiplexer,equipments.(ex. Agilis, ComTech, Prodelin, ViaSat, Raydne ComStream, Codan, Verso-Clarent MUX) Aeronautical Navigational Non-Directional Beacon (NDB).

· UHF/VHF Marine Radio System.

· Public Address & General Alarm System (PAGA)

· Environmental Monitoring System.

· Entertainment System.

· Installation and Test Procedure for Construction and commissioning Phase.

· Schematic Diagram interpretation for troubleshooting and repair.

· P&ID / PEFS, FLD, IEDS and ILD interpretation.

· Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Good Understanding of SHELL DEP, PTS and other standards.

· Construction Hook-Up Drawing, Location Drawing, ITPs.

· Electrical Single Line Drawing interpretation.

· To be able to objectively do a comprehensive site survey and other pre-installation requirements and be able to translate these information in a technical report format.

· Laboratory works which consist of instrumentation, Programmable Logical Controller (PLC), digital and analogue circuits, digital and analogue communications, Pneumatic, Printed Circuit Board (PCB), microprocessor and microcontroller.

· Proficient computer skills for software such as Microsoft Office, Microsoft Project, AutoCad, SolidWorks, Matlab, Multisim, P-Spice, Electronic Work Bend Simulator, Orcad, DipTrace and C/C++ Programming Language.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering, Supply, Delivery, Installation ,Inspection,Troubleshooting and Commissioning of all Telecommunication,E&I materials needed for the THAR JATH Development Project (SUDAN).

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment. Exposed and involved with Hi-Pot test for new cable and transformers, function test, stroke test, calibration, Interlock Test, Motor Solo Run Test, Relay Test, Loop Test and Mechanical Run test. Site Survey, installation, scanning Freq and commissioning of LongHaul 4Ghz, 5Ghz, 6Ghz, 7Ghz, 13Ghz, 18Ghz Microwave System for Radio. onshore, offshore, be able to objectively do a comprehensive site survey and other pre- installation requirements and be able to translate these information in technical report format, VHF Radio, UHF Radio, Repeaters, Canopy Wireless, PABX and Cisco data through Satellite and Fiber Optic PAGA System, HF-SSB, PABX, CCTV, LAN-Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Schematic Diagram interpretation for troubleshooting and repair.

· Highly competent in installation and commissioning of VSAT system

· which includes site survey, RFI test, Cross-pole, commissioning & trouble-shooting activities. Operationally competent in handling VSAT antenna system of 1.8m, 2.4m, 3.7 & 3.8m and off-shore Gyro auto-tracking antenna system, SeaTel & DMS.

· Highly competent in handling the operations of various Satcom equipments such as Antenna System, Radio Frequency Terminal (RFT), Satellite Modem, Block-up Converter (BUC) and Multiplexer,equipments.(ex. Agilis, ComTech, Prodelin, ViaSat, Raydne ComStream, Codan, Verso-Clarent MUX) Aeronautical Navigational Non-Directional Beacon (NDB).

· UHF/VHF Marine Radio System.

· Public Address & General Alarm System (PAGA)

· Environmental Monitoring System.

· Entertainment System.

· Installation and Test Procedure for Construction and commissioning Phase.

· Schematic Diagram interpretation for troubleshooting and repair.

· P&ID / PEFS, FLD, IEDS and ILD interpretation.

· Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Good Understanding of SHELL DEP, PTS and other standards.

· Construction Hook-Up Drawing, Location Drawing, ITPs.

· Electrical Single Line Drawing interpretation.

· To be able to objectively do a comprehensive site survey and other pre-installation requirements and be able to translate these information in a technical report format.

· Laboratory works which consist of instrumentation, Programmable Logical Controller (PLC), digital and analogue circuits, digital and analogue communications, Pneumatic, Printed Circuit Board (PCB), microprocessor and microcontroller.

· Proficient computer skills for software such as Microsoft Office, Microsoft Project, AutoCad, SolidWorks, Matlab, Multisim, P-Spice, Electronic Work Bend Simulator, Orcad, DipTrace and C/C++ Programming Language.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering, Supply, Delivery, Installation ,Inspection,Troubleshooting and Commissioning of all Telecommunication,E&I materials needed for the KEPPEL OFFSHORE AND MARINE SHIPYARD, BENOI SINGAPORE.

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment. Exposed and involved with Hi-Pot test for new cable and transformers, function test, stroke test, calibration, Interlock Test, Motor Solo Run Test, Relay Test, Loop Test and Mechanical Run test. Site Survey, installation, scanning Freq and commissioning of LongHaul 4Ghz, 5Ghz, 6Ghz, 7Ghz, 13Ghz, 18Ghz Microwave System for Radio. onshore, offshore, be able to objectively do a comprehensive site survey and other pre- installation requirements and be able to translate these information in technical report format, VHF Radio, UHF Radio, Repeaters, Canopy Wireless, PABX and Cisco data through Satellite and Fiber Optic PAGA System, HF-SSB, PABX, CCTV, LAN-Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Schematic Diagram interpretation for troubleshooting and repair.

· Highly competent in installation and commissioning of VSAT system

· which includes site survey, RFI test, Cross-pole, commissioning & trouble-shooting activities. Operationally competent in handling VSAT antenna system of 1.8m, 2.4m, 3.7 & 3.8m and off-shore Gyro auto-tracking antenna system, SeaTel & DMS.

· Highly competent in handling the operations of various Satcom equipments such as Antenna System, Radio Frequency Terminal (RFT), Satellite Modem, Block-up Converter (BUC) and Multiplexer,equipments.(ex. Agilis, ComTech, Prodelin, ViaSat, Raydne ComStream, Codan, Verso-Clarent MUX) Aeronautical Navigational Non-Directional Beacon (NDB).

· UHF/VHF Marine Radio System.

· Public Address & General Alarm System (PAGA)

· Environmental Monitoring System.

· Entertainment System.

· Installation and Test Procedure for Construction and commissioning Phase.

· Schematic Diagram interpretation for troubleshooting and repair.

· P&ID / PEFS, FLD, IEDS and ILD interpretation.

· Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Good Understanding of SHELL DEP, PTS and other standards.

· Construction Hook-Up Drawing, Location Drawing, ITPs.

· Electrical Single Line Drawing interpretation.

· To be able to objectively do a comprehensive site survey and other pre-installation requirements and be able to translate these information in a technical report format.

· Laboratory works which consist of instrumentation, Programmable Logical Controller (PLC), digital and analogue circuits, digital and analogue communications, Pneumatic, Printed Circuit Board (PCB), microprocessor and microcontroller.

· Proficient computer skills for software such as Microsoft Office, Microsoft Project, AutoCad, SolidWorks, Matlab, Multisim, P-Spice, Electronic Work Bend Simulator, Orcad, DipTrace and C/C++ Programming Language.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Engineering, Supply, Delivery, Installation ,Inspection,Troubleshooting and Commissioning of all Telecommunication,E&I materials needed for the NEWFIELD (Belumut & Puteri oil & Gas Platform).

· To ensure all work, tests and inspections undertaken by Sub-Contractor during the construction phase are inspected and accordance to PTS standards, Code, Specifications and quality requirements.

· To ensure the progress of actual construction with the construction plan (Monthly/Weekly) from sub-contractors.

· To supervise and to check the construction is carrying out as designed in drawings and construction plan.

· To ensure all Installation of E&I Equipment as designed during construction.

· To supervise on the installation of trunking, cable tray, conduit pipes, cable pulling, instrument tubing and cable termination of E&I equipment.

· To prepare project As-Built Red-line Mark-up and Hook-Up drawing for existing and new drawing.

· Field inspection of installed equipment, documentation of field report, punch list for completed works.

· Witness testing and pre-commissioning of equipment inclusive of insulation resistance test and continuity test, loop checking of control connection and other required by the standards prior start-up of the equipment. Exposed and involved with Hi-Pot test for new cable and transformers, function test, stroke test, calibration, Interlock Test, Motor Solo Run Test, Relay Test, Loop Test and Mechanical Run test. Site Survey, installation, scanning Freq and commissioning of LongHaul 4Ghz, 5Ghz, 6Ghz, 7Ghz, 13Ghz, 18Ghz Microwave System for Radio. onshore, offshore, be able to objectively do a comprehensive site survey and other pre- installation requirements and be able to translate these information in technical report format, VHF Radio, UHF Radio, Repeaters, Canopy Wireless, PABX and Cisco data through Satellite and Fiber Optic PAGA System, HF-SSB, PABX, CCTV, LAN-Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Schematic Diagram interpretation for troubleshooting and repair.

· Highly competent in installation and commissioning of VSAT system

· which includes site survey, RFI test, Cross-pole, commissioning & trouble-shooting activities. Operationally competent in handling VSAT antenna system of 1.8m, 2.4m, 3.7 & 3.8m and off-shore Gyro auto-tracking antenna system, SeaTel & DMS.

· Highly competent in handling the operations of various Satcom equipments such as Antenna System, Radio Frequency Terminal (RFT), Satellite Modem, Block-up Converter (BUC) and Multiplexer,equipments.(ex. Agilis, ComTech, Prodelin, ViaSat, Raydne ComStream, Codan, Verso-Clarent MUX) Aeronautical Navigational Non-Directional Beacon (NDB).

· UHF/VHF Marine Radio System.

· Public Address & General Alarm System (PAGA)

· Environmental Monitoring System.

· Entertainment System.

· Installation and Test Procedure for Construction and commissioning Phase.

· Schematic Diagram interpretation for troubleshooting and repair.

· P&ID / PEFS, FLD, IEDS and ILD interpretation.

· Fibre Optic cable selection, Termination, Connectorizing and Quality Control.

· Good Understanding of SHELL DEP, PTS and other standards.

· Construction Hook-Up Drawing, Location Drawing, ITPs.

· Electrical Single Line Drawing interpretation.

· To be able to objectively do a comprehensive site survey and other pre-installation requirements and be able to translate these information in a technical report format.

· Laboratory works which consist of instrumentation, Programmable Logical Controller (PLC), digital and analogue circuits, digital and analogue communications, Pneumatic, Printed Circuit Board (PCB), microprocessor and microcontroller.

· Proficient computer skills for software such as Microsoft Office, Microsoft Project, AutoCad, SolidWorks, Matlab, Multisim, P-Spice, Electronic Work Bend Simulator, Orcad, DipTrace and C/C++ Programming Language.

· Involved and to assist Commissioning Engineer during commissioning and start-up.

· Performed precautionary, regular and break down maintenance on the power generators,forklift, loader, compressors, centrifugal and the jet frame pumps. Protective and shut down prolongation done on crushers, apron feeders, mills, screens, compressors, conveyors, boilers, cyclones, heat exchangers.

· Performed precautionary, regular and break down maintenance Engine Ship.