MOHD. ARIFF BIN HUSSEIN
Supervisor Maintenance
Kulai,Johor
Summary
Full-time position in a multinational corporation which offers a professional working environment and enabling me to grow while meeting the corporation's goals. Experience over 15years in Electrical at Oil and Gas industries
Overview
18
18
years of professional experience
11
11
Certifications
Work History
Shift Supervisor Electrical (O&M)
MOL Hong Kong joint venture with VOPAK Netherlands
12.2021 - Current
- Ensure the jetty facility is compliant at all times with company policies and procedures, appropriate legislation and relevant codes of practice.
- Prepare and guide minor maintenance activities with the team and interacts with the contractor when required.
- Implement operating plans to fully utilize the operating capabilities of the plant terminal and maximize revenue.
- Attend all training courses as required in order to perform the operation, maintenance, safety-related activities, or staff development. (Attend 2 months major training exposed with real operational at VOPAK Gate Terminal, Maasvlakte in Rotterdam, Netherlands)
- Responsible for any Electrical equipment operation (Feed power supply from FSRU Ship 6.6KV and Jetty Backup from EDG, TDG, FSDG & UPS system) and involve maintenance activities (PTW, PM, CM, LOTO and weekly Test run/ Jetty Equipment changeover) and submit all parameter and documentation to PMS system.
- Act as Jetty Lead, Panel Control Operator for Field Operation and Loading Master to perform with a minimum staff required.
- Responsible for unloading transfer LNG carrier starting from cooldown pipeline header, arrival until departure; perform loading arms connection and disconnection. Also take action for HP Gas sent out from FSRU to Power Plant BPPS/LPS.
- Solve routine and less routine problems with consequences for equipment, processes, the environment, and/or safety; calling the shift supervisor in case of doubt or an unavoidable malfunction.
- Complete all documentation to support the management of change procedure for plant modifications.
- Ensures SHEQ guidelines during assigned shifts are strictly followed and part of the first intervention team in case of safety-related incidents.
- Specialization: LNG Jetty Terminal for FSRU and power plant (LPS & BPPS) – LNGC unloading transfer.
E&I Inspector (P&O) - Client representative
Sudd Petroleum Operating Company (SPOC)
02.2021 - 11.2021
- Company Overview: Dietsmann Engineering Supply Manpower
- Key personal for start-up all properties in Tharjath Plant during reinstatement project for E&I discipline.
- Attend RFI for Inspection and witness for all E&I activities from Main-con and Sub-con.
- Completed documentation sign-off inspection for all material received, check sheets activities, material cannibalized, punch list raised, MOC & STQ.
- Final check E&I Sub-System package by equipment Discipline Acceptance Cert and System Handover Cert for Final Documentation dossier.
- Make sure all installation and commissioning procedure follow-up with ITP and Process line Engineering.
- Involved for all planned and progress at site activities during Installation, pre-commissioning and Commissioning for start-up Central Power Plant 11KV for 2unit Diesel Engine Generator(9.8MW), Overhead Transmission Line 33KV, Wellhead Field Surface Facilities (16 of 27 Wells) and Central Process Facilities (MCC 6.6KV, DCS communication for CCR, Process and Utility area) for make sure 1st Oil export to pipeline Heglig to border country is successful.
- Attend for troubleshooting for operation maintenance during warranty period.
- Dietsmann Engineering Supply Manpower
Electrical Technician (O&M) - Operational staff
Dar Petroleum Operation Company (DPOC)
11.2015 - 01.2021
- Company Overview: CPECC - Huomoss Supply manpower
- Carry out the Preventive and Corrective maintenance activities for all Electrical equipment and systems including FPF (Field Production Facilities) and FSF (Field Surface Facilities) for Gumry Oil Field Plant.
- Working on underground and aboveground for EHT (Electrical Heat Tracing) and CP Transformer (Cathode Protection) system to prevent structure, underground pipeline and tank from rust and damage.
- Ability to read and review P&ID, PFD and all Electrical drawings for maintenance and troubleshooting requirements.
- Experience to work on Power Transformers, LV 400V motors feeder for MCC and MV 6.6kV power feeder for switchgears and RMU (Ring Main Unit).
- Carried out job for MV starter motor like VSD (Variable speed drive), Soft starter, HTR (High voltage thermal resistance) and ESP (Electrical Submersible Pump) panel system.
- Maintenance and monitor of AC & DC UPS, Battery chargers and Electrical Integrated Control Systems (EICS) for ESD and DCS communication.
- Weekly test run routine for EDG (Emergency Diesel Generator) and FWP (Fire Water Pump System).
- Working Experience of ATS (Auto Start Panel).
- Troubleshoot and service individual air conditioner package type (split unit for wall & tower base mounting types and window types.
- Ability to perform installation, modification jobs with quality and according to company policies.
- Work with safety environment and Implement isolation and de-isolation of electrical equipment with good practice procedure following PTW as a permit applicant.
- Prepared daily report of work activities and sent to superior for record documentation required.
- Handling electrical material spare parts for whole plant with Equipment history, Bill of material (BOM), Inventory and Site material request (SMR) by using Equipment material management system (EMMS).
- CPECC - Huomoss Supply manpower
QAQC E&I Inspector - Repsol Representative
Repsol Oil & Gas Malaysia Limited
06.2017 - 07.2017
- Company Overview: Sabah Repsol Malaysia Limited.
- Inspection and witness for all E&I Main-con and Sub-con activities.
- Completed documentation sign-off inspection for ITR-A sheets or superseded for all E&I activities.
- Final check for E&I Sub-System package by DAC (Discipline Acceptance Cert).
- Make sure all installation follow-up with ITP and Process line Engineering.
- Support Project team for all plan and progress activities during Hook-up and Installation, pre-commissioning, Commissioning and Course and Effect Matrix.
- Sabah Repsol Malaysia Limited.
E&I Inspector - Completion team
PETRA ENERGY (PMO)
10.2013 - 10.2015
- Company Overview: Sabah Shell Petroleum Company.
- Inspection and preparation of Check sheets for all E&I activities.
- Inspection of Distribution Panels, cable termination, support/tubing installation and all devices which included in Electrical, Instrumentation, Telecommunication, HVAC and Fire & Gas system.
- Rectification action plan for generated Punch List (raised by MMHE and CSU).
- Prepare new ITR-A sheets or superseded for all E&I activities (DCN/SI/WP) base on job card summary & MTO.
- Redo redline mark-up drawing for the modification/correction and sent to Engineering/Consultant.
- Request for inspection with client Inspector for last completed check sheet.
- Assess the electrical equipment with respect to its certification (Ex cert).
- Submitted ITR-A, Punchlist and DAC to OCMS for finalize completed inspection handover to CSU/system owner.
- Submitted daily progress reports activities to QA/QC Coordinator and Completion planner/CSR for DPR.
- Submitted all copy checksheet to KL Petra (KLPO) for final doc and handover certification.
- To perform the inspection and produce the relevant report as per ITP requirement.
- To inform & notify Client Inspector on actual production status and the readiness prior to inspection.
- Witness inspection and documentation of plant general field instrument according to standard installation hook-up, calibration, configuration, and functional test on different kinds of process variables pertaining to desired process, loop checking and sequence test of instruments through DCS.
- Sabah Shell Petroleum Company.
Electrical Tech - Commissioning team
KENCANA PINEWELL
02.2013 - 10.2013
- Do continuity loop check for control/power cable and check insulation test for motor and resistance winding.
- Perform torqueing termination cable.
- Tests uncouple/couple motor, bump test, endurance test, heater, rotation and record for starting/running current, vibration, temperature and rpm.
- Functional test for Cubical Feeder Starter (in test pos.), start/stop command from RCU for local and DCS for remote.
- Operate Battery Charger with Blackstart method, UPS system and Navigation system.
- Support Hook-up construction/completion progress activities for power supply sources: Portable Generator, temporary DB, Welding rectifier, Portable Compressor and Chillier.
- Check & functional test for lighting sys including emergency flouresont light, wellglass, floodlight and socket outlet.
- Follow up vendor for testing package/skid: DEG Caterpillar, GTG Solar Turbines, Water Maker and UV Steriliser, Jockey Pump, Fire Water Pump, Hot Water System, Caisson Pump, HVAC system and ABB panel.
- Follow up QC inspection in electrical side: FTR for lux test (lighting system), cable tagging and others checksheet for raised redline mark-up.
- Standby for 1st Oil and 1st Gas activities with Clients including: Corse and Effects Matrix, SDS (Shutdown system) and power failure for GTG/DEG/Gen-set.
- Involve in Standard Operation Procedure (SOP) method for incoming power supply system such as synchronizing / change over for GTG, DEG, MCC, Transformer and Portable Generator with real philosophy.
Instrument & Control Tech - Commissioning team
KENCANA PINEWELL
10.2012 - 01.2013
- Responsible for supervision of Instrument calibration & loop testing.
- Involved in preparation instrument activities, testing and commissioning of platform equipment's: Distributed Control System (DCS) / Plant Monitoring Control System (PMCS), Shutdown System (SDS) / Safety Instrumented System (SIS), Fire Alarm Panel (FM200) and Fire & Gas System (FGS), PA System (Telecommunications system), Pneumatic Fire Detection / Fusible Plug Loop (FPL), Turbo Generator (Solar Turbine).
- Involved as a DCS Operator during first oil introducing of operations which using Honeywell System for DCS with Delta-V.
- Involved with Turbine Generator and Turbine Compressor Start Up activities.
- Involve in commissioning (calibration work, continuity loop check, troubleshooting work and functional test) of individual equipment's per subsystem/system at fabrication yard.
- Liaise with client on technical requirement in performing the yard commissioning.
- Involve in interface check with other system such as the MCC & Heaters.
- Report all the progress to engineer in-charge & discuss in detail relation to progress and catch-up plan upon delay of activities.
- Handover of completed subsystem commissioned to client as per System Handover Procedure.
Process Technician - Finishing department
CIBA VISION JOHOR (CVJ) BHD
06.2012 - 10.2012
- Company Overview: Bio-Technology and Pharmaceutical.
- Perform preventive maintenance for line production and machine execution of the order for both Customer and internal organization.
- Troubleshooting of equipment or project operational problems may arise with shortest possible time.
- Bio-Technology and Pharmaceutical.
Technical Specialist - LAVA 12/15 package
PODOYO PLASTIC (M) SDN BHD
02.2010 - 06.2012
- Company Overview: Industrial Ink Cartridge manufacturing (Hewlett-Packard Singapore)
- Undertake preventive maintenance, troubleshoot, servicing and repair tools/machines in-house.
- Set-up performs routine adjustments, testing and calibration of all production equipment's including pneumatics, robotics and instruments parts.
- Ensure the plant equipment's are in functional condition to meet the production schedules, quality and productivity requirements.
- Perform any other duties as directed by the immediate supervisor from time to time.
- Industrial Ink Cartridge manufacturing (Hewlett-Packard Singapore)
Electrical Technician - Maintenance department
UNIVERSAL CABLE BHD
06.2008 - 02.2010
- Company Overview: Industrial power cable manufacturer.
- Attend to power failure/ short / trip & rectify accordingly.
- Preventive & corrective maintenance for production machines (Recoiling/ Furnace/ Extruder/Bow stranded/ Wiredrawing/ Cooling tower/ Properzi plant/ Take-out and Pay-off machine).
- Service for overhead crane, pumping system, compressor unit and other electrical items.
- Design electrical system for machine modification including Distribution Board, Panel, AC/DC motor, VSD and PLC.
- Industrial power cable manufacturer.
Education
CVA - Safety of Operational Supervisors
Hoogvliet
Rotterdam, Netherlands10.2022
APEL T7 (Master Application) - Electrical Engineering
University Technology Malaysia
10.2020
Chargeman A0 - Electrical Competency License from Malaysia Energy Commission
Industrial Training Institute - Johore
Johore, Malaysia06.2015
Diploma - Electrical Equipment and Installation Technology
University Kuala Lumpur
Malaysia12.2008
Electrician PW2 - Electrical Competency License from Malaysia Energy Commission
Industrial Training Institute - Johore
Johore, Malaysia06.2005
Skills
Proficient in Microsoft Office
Proficient in AutoCAD
Proficient in Flow Code
Trouble-shooting
Maintenance for Electrical Switch Board
Wiring domestic and Industry
PLC handling
Motor Control
Electrical tester devices
Sensor application
Certification
2022, HK First Aid Certificate Course CPR certified
Personal Information
- IC Number: 851226-01-6693
- Date of Birth: 26th December, 1985
- Gender: Male
- Marital Status: Married
- ID Type: IC No.
- ID Number: 851226-01-6693
International Passport
A57759669
Total Working Experience
17 Years
References
- V. Gunalan, +60136677684, OTL - Commissioning Team Leader, Sapura Kencana, v.gunalan@sapurakencana.com
- Nordin Md Nor, +60142621225, Prod. Superintendent Adar & Gumry, DPOC, Prod.Supt.A@darpetroleum.com
Timeline
Shift Supervisor Electrical (O&M)
MOL Hong Kong joint venture with VOPAK Netherlands
12.2021 - Current
E&I Inspector (P&O) - Client representative
Sudd Petroleum Operating Company (SPOC)
02.2021 - 11.2021
QAQC E&I Inspector - Repsol Representative
Repsol Oil & Gas Malaysia Limited
06.2017 - 07.2017
Electrical Technician (O&M) - Operational staff
Dar Petroleum Operation Company (DPOC)
11.2015 - 01.2021
E&I Inspector - Completion team
PETRA ENERGY (PMO)
10.2013 - 10.2015
Electrical Tech - Commissioning team
KENCANA PINEWELL
02.2013 - 10.2013
Instrument & Control Tech - Commissioning team
KENCANA PINEWELL
10.2012 - 01.2013
Process Technician - Finishing department
CIBA VISION JOHOR (CVJ) BHD
06.2012 - 10.2012
Technical Specialist - LAVA 12/15 package
PODOYO PLASTIC (M) SDN BHD
02.2010 - 06.2012
Electrical Technician - Maintenance department
UNIVERSAL CABLE BHD
06.2008 - 02.2010
CVA - Safety of Operational Supervisors
Hoogvliet
Chargeman A0 - Electrical Competency License from Malaysia Energy Commission
Industrial Training Institute - Johore
Diploma - Electrical Equipment and Installation Technology
University Kuala Lumpur
Electrician PW2 - Electrical Competency License from Malaysia Energy Commission
Industrial Training Institute - Johore
APEL T7 (Master Application) - Electrical Engineering
University Technology Malaysia