MOHD FAIZAL B. JAAFAR

• Scope offshore commissioning.
• Manage the daily work for instrument technicians do the toolbox talk every morning.
• Perform commissioning test package (CTP).
• Manage hot loop check all instruments type from field to panel systems DCS, IPS, FGS
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Asst shell operator commissioning and operate wellhead control panel.
• Perform Cause and effect IPS and FGS
• Mark- up drawing and prepare check sheets and testing report

. Project -TIMI

. Project - F23-POP-Skimmer pump

. Project - F23-POP-Cili Padi MP to LP

. Project - F23-POP-Flare Ignition Upgrade

. Project - F23-Fas green Fields and Brownfield

. Project - F6-Vlap

• Scope maintenance activities
• Perform preventive maintenance PM instrumentation device activity.
• Perform Troubleshooting instrumentation problem.
• Assists Vendor for instrument plants package.
• Perform PM check List testing report.
• Project - PETRONAS RAPID
• Client - PETRONAS

• Scope offshore hook-up and upgrade TCP train C.
• Manage daily E&I team activity and conduct toolbox talk every morning.
• Manage team laying,gland,termination electrical and instrument cable.
• Manage cold loop check all e&I cable from field to panel systems TCP,FGS,IPS & DCS.
• Project - Guntung A
• Client - Exxon mobile
• Location - Offshore Kuala Terengganu

• Scope offshore commissioning.
• Manage the daily work for instrument technician do the toolbox talk every morning.
• Perform commissioning test package (CTP).
• Manage hot loop check all instruments type from field to panel systems IPS & DCS
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Asst shell operator commissioning and operate wellhead control panel.
• Perform cause and effect check and perform hydraulic flushing tubing for new well.
• Mark- up drawing and prepare check sheets and testing report.
• Project - Malikai TLP
• Client - SHELL SABAH (SSPC)
• Location - Offshore KK,SABAH

• Scope offshore commissioning.
• Manage the daily work for instrument technician do the toolbox talk every morning.
• Perform commissioning test package (CTP).
• Manage hot loop check all instruments type from field to panel systems ICSS (SCADA).
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Asst shell operator commissioning and operate wellhead control panel.
• Mark- up drawing and prepare check sheets and testing report.
• Project - SK408 F6 BIM & GOREK
• Client - SHELL SARAWAK
• Location - Offshore MIRI, SARAWAK

• Scope onshore pre- commissioning.
• Manage the daily work for instrument technician do the toolbox talk every morning.
• Arrangement all instrumentation out from Store to Lab Calibration.
• Manage manpower for perform calibration all instrumentation PT, TT, FT, Valve, choke valve and calibration report.
• Manage pre- comm hot loop check all instruments type from field to panel systems ICSS (SCADA).
• Site level calibration, trouble shoot, fault finding and repair process instrumentation.
• Asst vendor commissioning and operate wellhead control panel.
• Mark- up drawing and prepare check sheets and testing report.
• Project - SK408 F6 BIM & GOREK
• Client - SHELL SARAWAK
• Location - Onshore LUMUT, PERAK

• Scope pre- commissioning fire and gas and calibration gas detector.
• Perform continuity check before power up for all Fire and Gas Detector.
• Review range Span before performs calibration gas and follows procedure.
• Perform calibration gas ZERO and range SPAN of the type, range SPAN for H2S 10 PPM and METHANE 70 LEL.
• Perform gas functional test between Fire and Gas system to verify the alarm set point.
• Troubleshoot fault finding and repair Fire and Gas detector.
• Asst IU&I supervision to completed task all package 14 for per- commissioning.
• Project - PETRONAS RAPID, PAKAGE 14
• Client - IU&I, PETRONAS
• Location - Onshore PEGERANG, JOHOR

• Scope offshore well tie-in for new well 102L and 102s
• Perform hot loop check for wellhead control panel transmitter and stroke valve scssv, ssv, wv.
• Do loop check electrical cable interface to IRP panel.
• Trouble shoot fault finding and repair process instrumentation.
• Asst vendor commissioning and operate wellhead control panel.
• Project - KNDP-A, KNDW-D
• Client - REPSOL
• Location - LABUAN

• Scope offshore commissioning of water injection system
• Manage manpower perform hot loop check for all instrumentation pressure, level, flow, temperature transmitter for multimedia backwash system, vacuum pump system and water injection system.
• Perform Commissioning water injection well and stroke valve scssv, ssv, wv and choke.
• Perform alignment vibration transmitter at water injection pump A,B
• Trouble shoot fault finding and repair process instrumentation.
• Perform documentation.
• Project - MALIKAI TLP
• Client - SHELL SABAH
• Location - Offshore KOTA KINABALU, SABAH

• Scope offshore commissioning
• Perform hot loop check for wellhead control panel transmitter and stroke valve scssv, ssv, wv.
• Do loop check electrical cable interface to IRP panel
• Trouble shoot fault finding and repair process instrumentation.
• Asst vendor commissioning and operate wellhead control panel.
• Project - KNDP-A, KNDW-D
• Client - REPSOL
• Location - Offshore LABUAN

• Scope offshore closed instrument commissioning punch list
• Commision for helideck light at well head platform syncs to mother platform.
• Stroking all choke valve by well head control panel
• Trouble shoot fault finding and repair process instrumentation.
• Asst vendor commissioning and operate wellhead control panel.
• Project - BERGANDING-C & KESUMBA
• Client - HESS
• Location - Offshore KOTA BHARU, KELANTAN

• Scope onshore and offshore commissioning of all instrument packages at MALIKAI TLP.
• Manage the daily work for instrument technician do the toolbox talk every morning.
• Perform commissioning test package (CTP).
• Perform special troubleshoot for remote ballast valve instruments equipment at HULL and TOP of column.
• Manage manpower for hot loop check all instruments type from field to panel systems PCS, SIS, FGS.
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Asst vendor commissioning and operate wellhead control panel.
• Mark- up drawing and prepare check sheets and testing report.
• Project - MALIKAI TLP
• Client - SHELL SABAH
• Location - Offshore KOTA KINABALU, SABAH

• Scope onshore pre-commissioning
• Perform checking and insulation test of control cable, pull the cable and dress it into cable tray or cable ladder.
• Line check to confirm the cable from control room to junction box and instrument at the field
• Continuity checks all termination done from instrument Fire and gas, PAGA systems and Telecom at field to panel.
• Perform hot loop check Fire and gas, PAGA systems and Telecom from field to systems panel.
• Asst vendor commissioning in jacking lead.
• Mark- up drawing and prepare check sheets and testing report.
• Project - TAPI-A, MALATI, MDF, AMA
• Client - CPOC
• Location - Onshore LUMUT, PERAK

• Scope onshore pre- commissioning
• Perform checking and insulation test of control cable, pull the cable and dress it into cable tray or cable ladder.
• Perform hot loop check Fire and gas, PAGA systems and Telecom from field to systems panel.
• Asst vendor commissioning in jacking lead.
• Mark- up drawing and prepare check sheets and testing report.
• Project - MOPU SEA BASE (TSR)
• Client - NAVY
• Location - Onshore LUMUT, PERAK

• Scope onshore pre- commissioning
• Perform checking and insulation testing of control cable, pull the cable and dress it into cable tray or cable ladder.
• Line check to confirm the cable from control room to junction box and instrument at the field or process.
• Continuity checks all termination done from instrument, fire and gas equipment, junction box and marshaling cabinets or panel.
• Project - JDA GAS BALANSING (EVA)
• Client - PETRONAS TTM
• Location - Onshore LUMUT, PERAK

• Testing and pre- commissioning rig and derrick equipment
• Field testing all type of instruments from skid at DES.
• Perform hot loop check from field instrument to IDCS and FGS system cabinet.
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Assist system vendor for commissioning, preparation and compile instrument data sheet, red-line mark-up, and as-built drawing.
• Prepare of calibration reports, check sheets and testing report.
• Project - RIG AND DERRICK EQUIPMENT SET
• Client - SAPURA KENCANA DRILLING
• Location - Onshore LUMUT, PERAK

• Calibration of field instrument
• Perform the calibration of pressure transmitter and temperature transmitter follows the data-sheet and VDI from factory.
• Stroking valve for SDV and BDV energized and DE-energized solenoid and check the closed times and open times.
• Prepare of calibration report, check sheets and testing report.
• Project - INSTR PLANT MODULE
• Client - PETRONAS
• Location - Onshore KUALA TERENGGANU

• Scope onshore pre- commissioning
• Commission all type of instrument to DCS, IPS, and FGS systems panel.
• Site calibration, trouble shoot, fault finding and repair process instrumentation.
• Assist system vendor for commissioning preparation and compile instrument data sheet, red-line mark-up and as-built drawing.
• Prepare of calibration reports, check sheet and testing reports.
• Project - LAILA & D12
• Client - SHELL SARAWAK
• Location - Onshore KLANG, SELANGOR

• Scope offshore commissioning
• Calibration all type of transmitter, dis-placer level transmitter, flow transmitter, flow control valve, blow down valve, shut down valve, MOV, temperature control valve, temperature transmitter, temperature gauge, and other instrument device.
• Commission for all instrument systems, DCS, IPS, Fire & Gas equipment from fields to marshaling cabinets.
• Assist vendor to power-up, commission and perform functional test all type of instrument including the system (DCS, IPS, FGS at turbine )
• Troubleshoot the system or process control if any problem found.
• Prepare and completed all check sheet or documentation after commission and
• Clear out punch list to make sure all work or test done and completed before handover to client.
• Project - AMPA 98 & AMPA 99
• Client - SHELL BRUNEI BHD
• Location - Offshore BRUNEI

• Scope onshore pre- commissioning
• In charge of pre- commissioning, Loop check, Calibration and function test all type of transmitter, dis-placer level transmitter, flow transmitter, flow control valve, Pressure regulating valve, blow down valve, shut down valve, MOV, temperature control valve, temperature transmitter, temperature gauge, and other instrument device.
• Installation various type of instrument, fire and gas system equipment, bend tubing for air supply, signal line and impulse line, leak test and loop test and fusible plug connection from field to instrument control panel.
• Perform checking and insulation testing of control cable
• Line check to confirm the cable from control room to junction box and instrument at the field or process.
• Gladding and terminate the cable to all instrument, fire and gas equipment, junction box and marshaling cabinets or panel.
• Loop check all termination done from instrument, fire and gas equipment, junction box and marshaling cabinets or panel.
• Assist vendor to power-up, commission and perform functional test all type of instrument including the system (DCS, IPS, FGS)
• Troubleshoot the system or process control if any problem found.
• Prepare and completed all check sheet or documentation after calibration, installation, testing and commissioning. Clear out punch list to make sure all work or test done and completed before handover
• Project - AMPA 98 & AMPA 99
• Client - SHELL BRUNEI BHD
• Location - Onshore BRUNEI

• Scope offshore commissioning
• Calibration all type of transmitter, dis-placer level transmitter, flow transmitter, flow control valve, blow down valve, shut down valve, MOV, temperature control valve, temperature transmitter, temperature gauge, and other instrument device.
• Commission for all instrument systems, DCS, IPS, Fire & Gas equipment from fields to marshaling cabinets.
• Assist vendor to power-up, commission and perform functional test all type of instrument including the system (DCS, IPS, FGS at turbine )
• Troubleshoot the system or process control if any problem found.
• Prepare and completed all check sheet or documentation after commission and
• Clear out punch list to make sure all work or test done and completed before handover to client.
• Project - E8K & F13K
• Client - SHELL SARAWAK
• Location - Offshore MIRI, SARAWAK

• Scope onshore pre- commissioning
• Calibration all type of transmitter, dis-placer level transmitter, flow transmitter, flow control valve, blow down valve, shut down valve, MOV, temperature control valve, temperature transmitter, temperature gauge, and other instrument device.
• Commission for all instrument systems, DCS, IPS, Fire & Gas equipment from fields to marshaling cabinets.
• Assist vendor to power-up, commission and perform functional test all type of instrument including the system (DCS, IPS, FGS at turbine )
• Troubleshoot the system or process control if any problem found.
• Prepare and completed all check sheet or documentation after commission and
• Clear out punch list to make sure all work or test done and completed before handover to client.
• Project - E8K & F13K
• Client - SHELL SARAWAK
• Location - Onshore LUMUT, PERAK

• Scope onshore pre- commissioning
• In charge of Pre- commissioning, Loop check, Calibration and function test all type of transmitter, dis-placer level transmitter, flow transmitter, flow control valve, Pressure regulating valve, blow down valve, shut down valve, MOV, temperature control valve, temperature transmitter, temperature gauge, and other instrument device.
• Installation various type of instrument, fire and gas system equipment, bend tubing for air supply, signal line and impulse line, leak test and loop test and fusible plug connection from field to instrument control panel.
• Perform checking and insulation testing of control cable
• Line check to confirm the cable from control room to junction box and instrument at the field or process.
• Gladding and terminate the cable to all instrument, fire and gas equipment, junction box and marshaling cabinets or panel.
• Loop check all termination done from instrument, fire and gas equipment, junction box and marshaling cabinets or panel.
• Assist vendor to power-up, commission and perform functional test all type of instrument including the system (DCS, IPS, FGS)
• Troubleshoot the system or process control if any problem found.
• Prepare and completed all check sheet or documentation after calibration, installation, testing and commissioning.
• Project - BHWP-A Client - PETROFAC
• Project - NVF-CPP Client - NEWFIELD
• Project - F28-DRA Client- SHELL SARAWAK
• Project - KNJT-C Client - PETRONAS
• Project - CIJIPADI Client - SHELL SARAWAK
• Project - TBDR-A Client- PETRONAS
• Project - DULANG Client- PETRONAS
• Location - Onshore LUMUT, PERAK