Summary
Overview
Work History
Education
Skills
Completed Projects
Publications
Training
Software
Timeline
Generic
Md Saifudaullah Bahrudin

Md Saifudaullah Bahrudin

Technical Advisor
Kuala Terengganu

Summary

Expert Technical Advisor for Siemens Energy OMNIVISE T3000 DCS with comprehensive system administration and commissioning credentials across global power generation facilities. Specialized in developing innovative solutions for complex control system challenges, seamlessly migrating legacy systems, and implementing mission-critical cybersecurity protocols. Demonstrated success optimizing plant performance through advanced data analytics and virtualization technologies. Possessing both deep technical mastery and exceptional stakeholder communication skills, consistently delivering solutions that enhance operational efficiency while reducing downtime. Recognized for leadership in crisis situations and commitment to knowledge sharing that elevates team capabilities and ensures sustainable system performance.

Overview

12
12
years of professional experience

Work History

On-Call Engineer

Siemens Energy Sdn Bhd
01.2021 - Current
  • Established strong working relationships with clients through exceptional communication skills, fostering trust and collaboration.
  • Developed positive working relationships with stakeholders to effectively coordinate work activities.
  • Conducted feasibility studies for new projects, providing detailed analysis and recommendations that informed leadership decisions.
  • Created detailed reports on maintenance activities and findings.
  • Resolved customer complaints in prompt, polite and professional approach.
  • Reduced downtime through efficient troubleshooting and root cause analysis of equipment failures.
  • Developed preventive maintenance schedules for DCS ecosystem to minimize downtime and optimize performance.
  • Trained junior engineers on best practices in engineering, fostering a culture of continuous learning and improvement.

Siemens SPPA-T3000 Commissioning Engineer

Agensi Pekerjaan Air Energy (Malaysia) Sdn Bhd
10.2017 - 05.2019
  • Develop control logics based on requirement provided by customer
  • Acted as contact for client's communication with field personnel.
  • Develop third party communication i.e. Modbus, IEC61850, IEC60870, Blackbox
  • Prepare custom pictograms and faceplates as per customer's requirements.
  • Perform Site Acceptance Test for the automation system.
  • Assist Cold and Hot Commissioning of Boiler and BOP for coal fired power plant (Installation/ recalibration/testing/PID tuning/troubleshooting of the instruments, valves, motor, pump, control system etc.)
  • Modification of Automation system (T3000) and Human Machine Interface based on the P&ID, I/O list, and requirements stated by customer.
  • Advise on logic optimization to reduce CPU load and increase process efficiency.
  • SPPA-T3000 System administrator
  • As-Built Documentation

Siemens SPPA-T3000 Commissioning Engineer

Humach Engineering Sdn Bhd
05.2017 - 10.2017
  • Develop control logics based on requirements provided by customer
  • Develop third party communication i.e. Modbus, IEC61850
  • Design Human Machine Interface based on the P&ID, I/O list, and requirements stated by customer
  • Prepare custom pictograms and faceplates as per requirements provided by customer.
  • Perform Site Acceptance Test for the automation system.
  • Implementation of Field Revision Request (FRR) at site to optimize the Power Plant Instrumentation and Control Systems.
  • Perform Cold and Hot Commissioning of BOP for geothermal power plant (Installation/ recalibration/testing/PID tuning/troubleshooting of the instruments, valves, motor, pump, control system etc.)
  • Modification of Automation system (T3000) and Human Machine Interface based on the P&ID, I/O list, and requirements stated by customer.

Commissioning Engineer

Siemens Malaysia Sdn Bhd
03.2017 - 05.2017
  • Develop the control logics based on the requirements stated in the Functional Description.
  • Design Human Machine Interface based on the P&ID, I/O list, and requirements stated in the Functional Description provided by the customer.
  • Prepare custom pictograms and faceplates based on requirements provided by customer.
  • Perform Site Acceptance Test for the automation system.
  • Implementation of Field Revision Request (FRR) at site to optimize the Power Plant Instrumentation and Control Systems.
  • Perform Cold and Hot Commissioning of BOP (Installation/ recalibration/testing/PID tuning/troubleshooting of the instruments, valves, motor, pump, control system etc.)
  • Involve in Cold Commissioning of GT.

Instrumentation and Control Engineer

Siemens Malaysia Sdn Bhd
12.2013 - 02.2017
  • Hardware Engineering
  • Implementation of design typical into manufacturing drawings
  • Develop the arrangement drawing of control system cabinets.
  • Design power supply diagram for control system cabinets.
  • Design loop drawings for manufacturing of control system cabinets.
  • Design cabling drawings and documentation for erection and commissioning stages.
  • Produce as-built documents.
  • Software Engineering
  • Develop the control logics based on the requirements stated in the Functional Description.
  • Design Human Machine Interface based on the P&ID, I/O list, and requirements stated in the Functional Description provided by the customer.
  • Prepare custom pictograms and faceplates as per customer requirements.
  • Perform Factory Acceptance Test for the automation system.
  • Erection and Commissioning
  • Implementation of Field Revision Request (FRR) at site to optimize the Power Plant Instrumentation and Control Systems.
  • Involve in loop checks for BOP and GT
  • Perform Cold and Hot Commissioning of BOP (Installation/ recalibration/testing/PID tuning/troubleshooting of the instruments, valves, motor, pump, control system etc.)
  • Involve in Cold Commissioning of GT.
  • Modification of Automation system (T3000) and Human Machine Interface.
  • Migration
  • Migration system from SPPA T2000 (Teleperm XP) to SPPA T3000
  • Involve in data collection phase
  • Supervise the replacement of old control cabinet to new control system cabinet
  • Supervise the cable termination on control system cabinet side
  • Design loop drawings for manufacturing of control system cabinets.
  • Design cabling drawings and documentation for erection and commissioning stages.

Education

Bachelor (Hons) - Electronics (Instrumentation) Engineering

MARA University of Technology
Shah Alam
01.2010 - 1 2013

Diploma - Electrical (Electronics) Engineering

MARA University of Technology
Dungun
01.2007 - 1 2010

Skills

Stakeholder Communication

Team Collaboration

Continuos Improvement

Technical reporting

undefined

Completed Projects

  • Pengerang Cogeneration Plant, On Call Engineer, 01/21 - present
  • Red Dragon Coal Fired Power Plant -Unit 7 and Common BoP and Boiler T3K, Commissioning Engineer, 10/17 - 05/19
  • Unit 3 Tongonan Geothermal Plant, BoP Commissioning Engineer, 07/17 - 10/17
  • Unit 2 Tongonan Geothermal Plant, BoP Commissioning Engineer, 05/17 - 06/17
  • RMPDC-Pilot, iOS Apps Developer, 03/17 - 05/17
  • Unit 1 Tongonan Geothermal Plant, BoP Commissioning Engineer, 10/16 - 02/17
  • Balkash ST, Hardware Engineer, 07/16 - 08/16
  • Mindanao HMI Migration, Hardware / Software Engineer, 04/16 - 06/16
  • Santa Rita HMI Migration, Hardware / Software Engineer, 03/16 - 07/16
  • Tongonan Geothermal Plant BoP T3K, Software Engineer, 04/15 - 09/16
  • Malitbog Geothermal Plant BoP T3K, Software Engineer, 04/15 - 09/16
  • Connaught Bridge Upgrade GT - Unit A and B - Migration from T2k to T3k, Commissioning Engineer, 01/15 - 03/15
  • Zahrani CCPP, Lebanon, BoP T3K Software FAT, 09/14 - 11/14
  • Connaught Bridge Upgrade GT - Unit A and B - Migration from T2k to T3k, Lead Hardware Engineer, 06/14 - 12/14
  • Verkhnetagilskay GT SGT5-4000F, Hardware Engineer, 05/14 - 06/14
  • Yuzhnouralsk ST, Hardware Engineer, 05/14 - 05/14
  • Yuzhnouralsk GT SGT5-4000F, Hardware Engineer, 04/14 - 05/14
  • Sengkang BOP, Hardware Engineer, 02/14 - 03/14
  • GMR Energy ST SGT5-4000F, Hardware Engineer, 02/14 - 02/14

Publications

Development of Fire Alarm System Using Raspberry Pi and Arduino Uno, IEEE, International Conference on Electrical, Electronics and System Engineering (ICEESE), 12/04-12/05/13, 10.1109/ICEESE.2013.6895040, 978-1-4799-3178-1, http://ieeexplore.ieee.org/document/6895040/?arnumber=6895040

Training

  • SPPA-T3000 Administration & Commissioning
  • SPPA-T3000 System Setup
  • SPPA-T3000 SeS3000 & drAps3000 Setup
  • SPPA-T3000 Basic and Advance Training
  • COMOS Engineering Tools Training
  • TEC4FDE Engineering Tools Training
  • Embedded Systems Design, ARM Controller
  • Embedded Systems Software Design
  • Zynq All Programmable SoC Architecture

Software

Ominvise T3000

COMOS

VISIO

TEC4FDE

Windows Operating System

Unix Operating System

Linux Operating System

Microsoft Office

IEC61850/IEC60870

Modbus

Java/PHP/Python/C/C

Javascript/Matlab/Swift

GIT

Timeline

On-Call Engineer

Siemens Energy Sdn Bhd
01.2021 - Current

Siemens SPPA-T3000 Commissioning Engineer

Agensi Pekerjaan Air Energy (Malaysia) Sdn Bhd
10.2017 - 05.2019

Siemens SPPA-T3000 Commissioning Engineer

Humach Engineering Sdn Bhd
05.2017 - 10.2017

Commissioning Engineer

Siemens Malaysia Sdn Bhd
03.2017 - 05.2017

Instrumentation and Control Engineer

Siemens Malaysia Sdn Bhd
12.2013 - 02.2017

Bachelor (Hons) - Electronics (Instrumentation) Engineering

MARA University of Technology
01.2010 - 1 2013

Diploma - Electrical (Electronics) Engineering

MARA University of Technology
01.2007 - 1 2010

Similar Profiles

CREATE PROFILE
Md Saifudaullah BahrudinTechnical Advisor