MARTIN ANAK MANDOH
E & I SUPERVISOR
Bintulu
Summary
To utilize my knowledge and skills for the job in the company beside to gain more experiences and to improve myself in career enhancing and looking for new and competitive working environment
Overview
31
31
years of professional experience
3
3
years of post-secondary education
3
3
Languages
Work History
INSTRUMENT SUPERVISOR
MAXGRIP SERVICE SDN BHD
BINTULU, SARAWAK
11.2024 - Current
- Location: Oil Field D35/J4/D12/D21- Gas Field KUMANG/F9JT/F12JT/B11/PC4.
- To perform preventive maintenance 3M,6M,12M,24M on critical device functional test (CDFT) on instrument protective system device, level transmitter / pressure transmitter / flow transmitter / gas detector / smoke detector / flame detector / heat detector / ESD pushbutton / open path gas detector and beacon & sounder speaker and provide calibration sheet.
- To perform corrective maintenance activities on pressure, temperature, level and flow transmitter and FGS device as per request from operation.
- To perform troubleshooting and service control valve positional, shutdowns valve and blow down valve solenoid.
- To carry out troubleshoot choke valve, level control valve and pressure control valve due bad reading at DCS.
- Assist to troubleshoots gas engine generator when engine have problem or shutdown.
- Assist production to start-up platform during start up time.
- To troubleshoot wellhead control module, testing and functional test after repairing.
- To monitoring the PMCS or DCS during perform calibration and functional test activity including perform manual override system (MOS) at Delta V Emerson and DCS / IPS and ICSS system.
- To provide calibration sheet after 6M,12M and 24M PPM preventive maintenance task completed.
- To preparation e-PTW & e-JHA and apply SSBOC when required before work start.
- Update daily timesheet and report at SAP system.
- (Seconded to PETRONAS SDN BHD SKA CMPE Cluster 4)
- Streamlined workflow efficiency by optimizing and implementing new instrument configurations.
- Conducted risk assessments prior to project commencement, implementing necessary mitigation strategies to ensure smooth execution.
- Managed inventory levels of spare parts and consumables for uninterrupted instrument operation throughout projects.
- Supported successful project completion with effective communication between stakeholders on instrumentation requirements and progress updates.
INSTRUMENT SUPERVISOR
EPOMS SDN BHD
BINTULU, SARAWAK
10.2022 - 11.2024
- Location: Oil Field D35/J4/D12/D21- Gas Field KUMANG/F9JT/F12JT/B11/PC4.
- To perform preventive maintenance 3M,6M,12M,24M on critical device functional test (CDFT) on instrument protective system device, level transmitter / pressure transmitter / flow transmitter / gas detector / smoke detector / flame detector / heat detector / ESD pushbutton / open path gas detector and beacon & sounder speaker and provide calibration sheet.
- To perform corrective maintenance activities on pressure, temperature, level and flow transmitter and FGS device as per request from operation.
- To perform troubleshooting and service control valve positional, shutdowns valve and blow down valve solenoid.
- To carry out troubleshoot choke valve, level control valve and pressure control valve due bad reading at DCS.
- Assist to troubleshoots gas engine generator when engine have problem or shutdown.
- Assist production to start-up platform during start up time.
- To troubleshoot wellhead control module, testing and functional test after repairing.
- To monitoring the PMCS or DCS during perform calibration and functional test activity including perform manual override system (MOS) at Delta V Emerson and DCS / IPS and ICSS system.
- To provide calibration sheet after 6M,12M and 24M PPM preventive maintenance task completed.
- To preparation e-PTW & e-JHA and apply SSBOC when required before work start.
- Update daily timesheet and report at SAP system.
- Streamlined workflow efficiency by optimizing and implementing new instrument configurations.
- Managed inventory levels of spare parts and consumables for uninterrupted instrument operation throughout projects.
- Conducted risk assessments prior to project commencement, implementing necessary mitigation strategies to ensure smooth execution.
- Collaborated with cross-functional teams to troubleshoot complex instrumentation issues and provide timely resolutions.
- Improved instrument accuracy by conducting regular calibration and maintenance procedures.
SENIOR INSTRUMENT TECHNICIAN
ELECTRO SERVE (M) SDN BHD
BINTULU, Sarawak
02.2021 - 09.2022
- Location: PTTEP Platform (Southern Hub, Serendah, Golok PA & PB, Belum, Merapuh and Pemanis.
- To perform preventive maintenance 1M,6M,12M,24M on critical device functional test (CDFT) on instrument protective system device, level transmitter / pressure transmitter / flow transmitter / gas detector / smoke detector / flame detector / heat detector / ESD pushbutton / open path gas detector and beacon & sounder speaker and provide calibration sheet.
- To perform corrective maintenance activities on pressure, temperature, level and flow transmitter and FGS device as per request from operation.
- To carry out perform functional test / service and troubleshoot gas detector and flame detector.
- To perform troubleshooting and service control valve positional, shutdowns valve and blow down valve solenoid.
- To carry out troubleshoot choke valve, level control valve and pressure control valve due bad reading at DCS.
- Carry troubleshoots gas engine generator when engine have problem or shutdown.
- Assist operation to start-up platform during start up time.
- To troubleshoot wellhead control module, testing and functional test after repairing.
- To monitoring the HMI or DCS during perform calibration and functional test activity including perform manual override system (MOS) at Honeywell & Yokogawa DCS / IPS and ICSS system.
- Filled up check sheet and preparation document required for every task performed.
- To preparation PTW, EJSA & SSOC before work start.
- Improved plant efficiency with expert calibration of control valves, transmitters, and analyzers.
- Delivered accurate diagnostics for complex instrument issues using advanced testing tools and techniques.
- Reduced downtime for critical instruments by providing timely troubleshooting and repair services.
- Maintained high-quality standards in instrument repairs, adhering to strict quality assurance protocols during all stages of work execution.
- Mentored junior technicians, sharing knowledge, expertise, and best practices to enhance overall team performance.
SENIOR INSTRUMENT TECHNICIAN
EPOMS SDN BHD
BINTULU, SARAWAK
12.2019 - 12.2020
- Location: FPSO Helang Yinson Miri Sarawak Water.
- To perform preventive maintenance 1M,3M,6M,12M on instrument protective system, pressure, level, flow and FGS device.
- To perform corrective maintenance on pressure, temperature, level and flow transmitter as per request from production operation.
- To perform service and troubleshoot FGS device when required from operation.
- To perform troubleshooting and service control valve positional, shutdowns valve and blow down valve solenoid when required.
- To monitoring the HMI or DCS during perform calibration and functional test activity including perform manual override system (MOS) at DCS / IPS and ICSS system.
- To perform on routine instrument preventive maintenance and corrective maintenance activities.
- Filled up check sheet and preparation document required for every task performed.
- Up - date IFS system after performs weekly, monthly and yearly preventive maintenance on IFS system.
- To perform weekly pm, visual inspection for fire and gas device as per IFS system.
- Perform visual check and take reading on battery at life boat, fast rescue boat, fire water pump A/B and battery bank at GTCC A/B.
- Improved plant efficiency with expert calibration of control valves, transmitters, and analyzers.
- Delivered accurate diagnostics for complex instrument issues using advanced testing tools and techniques.
- Enhanced system reliability by implementing preventive maintenance procedures for instrumentation equipment.
- Reduced downtime for critical instruments by providing timely troubleshooting and repair services.
- Maintained high-quality standards in instrument repairs, adhering to strict quality assurance protocols during all stages of work execution.
E&I FOREMAN
PETRA RESOURSES SDN BHD
BINTULU, SARAWAK
05.2017 - 12.2019
- Project: BIF / BCOT Bintulu Integrated Facility.
- To carry out monitoring, supervise sub-contractor Petra at work site during perform activity at work site and make sure comply with safety procedures.
- To lead team to perform isolation resistance test for new power, control and instrument cable.
- To carry out check and assist E&I inspector during inspection material at Petra yard.
- To lead team, perform loop check and pre- commissioning activity.
- To perform work scoping for new work order base on AFC drawing.
- Lead crew to perform installation of new instrument panel including termination.
- To pull, laying undergrown cable power and instrument cable and make sure comply with client requirement.
- To inspection of cable trancing before cable laying and make sure follow the AFC drawing before backfill activity.
- Acting E&I Supervisor during E&I Supervisor onboard time off.
- Manage, plan and monitor worksite activity base on the job card and attend daily progress meeting.
- Assist commissioning team during their activity such as cool & hot loop check, field device simulation test, HV &LV cable insulation test & LV motor insulation & resistance test.
- Implemented preventive maintenance programs that increased equipment life and reduced overall operating costs.
- Verified that work performed by electricians met good workmanship standards and complied with current electrical codes.
- Assisted in the preparation of detailed project reports for management review, outlining progress made against established goals and objectives as well as potential risks or challenges faced during execution phases.
- Supported project managers in developing accurate cost estimates for E&I projects by analyzing labor, materials, and equipment requirements.
- Mentored junior technicians, fostering a culture of learning and professional development within the team.
- Contributed to a positive work environment by maintaining high levels of professionalism, demonstrating strong work ethic, and promoting teamwork among colleagues.
HVAC TEAM LEADER
NAIM ENGINEERING SDN
BINTULU, SARAWAK
10.2016 - 04.2017
- Location: Oil Field D35/J4/D12/D21- Gas Field KUMANG/F9JT/F12JT/B11/PC4.
- Lead team to carry out install air conditioning DAIKIN (VRV TYPE VI) indoor and outdoor unit.
- Lead team to lay and install copper tubing from outdoor unit to indoor unit as per drawing.
- Pull lay power and signal cable from indoor to outdoor unit, including termination work.
- To perform leaked test and pressure test for cooper tubing from outdoor to indoor unit.
- Perform commissioning activity and power up the unit indoor and outdoor.
E&I SUPERVISOR
FATIMAH BERSATU SDN BHD
BINTULU, SARAWAK
11.2015 - 09.2016
- Project: Provision Of Engineering, Procurement, Construction, Installation and Commissioning (EPCIC) Of Long-Term Power Solution at Bintulu Onshore Receiving Facility.
- To ensure all E&I work is done safely and completed in time according to plan met murphy site specific requirement.
- Supervised E&I Crew executed the installation activities.
- Monitoring and lead the crew carried out preparation works.
- Site verification against AFC drawing and marked up the red line drawing for E&I inspector to update.
- Supervise monitoring E&I crew during perform Hook up and commissioning activity.
- Planned for the work and accomplished daily for planner to update.
- Liaise with Murphy project team and E&I Commissioning Engineer with regard to works onsite.
- Lead team to pull/lay power and control cable (4CX300/185mm,2CX2.5mm,7CX2.5mm and 3CX2.5mm) from existing panel to new panel and equipment.
- Lead team to carry out continuity check and insulation resistance test for new power cable before do the cable laying.
E&I SUPERVISOR / FOREMAN
PETRA RESOURCES SDN BHD
BINTULU, SARAWAK
03.2005 - 06.2015
- Project: SHELL Saderi Subsea Development Project at M1 & M3, F6 & F23 Living Quarters Change Out, F23 Vlap (Very Low Abandon Platform, F23 Rejuvenation, F6 Rejuvenation Project and F23r-A Cilipadi Gas Field Development Project E8, F13 and Compression Project at E11 Complex.
- To ensure all E&I work is done safely and completed in time according to plan met SSB site specific requirement.
- Supervised E&I Crew executed the installation and well tie-in activities of Sadri, M3 / G7 subsea development project, F6 LQ Change out and F23 VLAP Compression Project (very low abandon platform).
- Monitored and lead the crew carried out preparation works for VLAP Module installation and hook -up / tie -in and commissioning activities.
- Assist the E&I Commissioning team with to perform commissioning activities.
- Site verification against AFC drawing and marked up the red line drawing for E&I inspector to update.
- Supervise monitoring E&I crew during carried out demolition, Hook - Up Tie - In and commissioning of new system equipment such as ESD /PAPA, Telecommunication system, FGS System, power and lighting system during F6 living quarters change out.
- Planned for the work and accomplished daily for planner to update. Liaise with SSB OT, PLS and E&I Commissioning Engineer with regard to works on site.
- To preparation PTW and JHA and make sure all related document is attached.
E&I TECHNICIAN
SARKU ENGINEERING SERVICES SDN BHD
BINTULU, SARAWAK
03.2002 - 01.2005
- Project: SHELL Sabah & Sarawak Water Offshore and E11 Rejuvenation Project.
- To preparation PTW & JHA before work command.
- To perform loop checking and pre-commissioning of new instrument ion.
- To perform function test and calibration pressure, temperature, level, flow and FGS.
- To carry out installation of new cable gland for new instrument and electrical cable.
- To perform termination work at marshaling cabinet and field junction box.
- To perform cable laying from field junction box to instrument device as per cable schedule.
- To Lay and install tubing for instrument impulse line and air supply for control valve and SDV/BDV valve.
INSTRUMENT TECHNICIAN
WEHAYA SDN BHD
BINTULU, SARAWAK
08.2001 - 02.2002
- Project: BSTAB 1&2 Flash Gas Compressor Re-Routing Line Project at Integrated Facilities Plant (BIF).
- Installation of new instrument device and new junction box at field site.
- Pull and lay instrument cable to new instrument device including glanding and termination work.
- To lay and installed impulse line tubing for new instrument device.
- Loop checking, troubleshooting, modification and assist operation to do the commissioning.
E&I TECHNICIAN
DAYANG ENTERPRISE SDN BHD
BINTULU, SARAWAK
07.2000 - 07.2001
- Project: Sabah and Sarawak Water Offshore.
- Installation of new instrument device.
- Perform pre-commissioning, troubleshooting, modification and of new instrument devices included FGS detector.
- Assist operation calibration of new instrument flow, pressure, temperature transmitter, level switch and control valve.
ELECTRICAL TECHNICIAN
TYCO ENGINEERING CONTRUCTION (M) SDN BHD
BINTULU, SARAWAK
06.1995 - 04.2000
- Project: Shell SMDS Re-Construction Project at Bintulu, Petronas MLNG Dua Cable Change Out Project & MTB Hicom Kuantan Pahang.
- Installed of new UPS panel and demolition existing UPS panel.
- Pull lay power and control cable to new UPS panel and battery bank.
- Glanding and termination power cable going to new UPS panel.
- Loop check and insulation resistance test for new power and control cable.
- Assist vendor to commissioning and power-up new panel.
- To installed of cable ladder and cable tray for new cable routing.
- Pull lay power and control cable to new equipment.
- Gland termination power and control cable at MCC switch gear room.
ASSISTANT ELECTRICIAN
MAZER KENTZ (M) SDN BHD
BINTULU, SARAWAK
10.1994 - 01.1995
- Project: MLNG Dua Project.
- Pull and lay power and control cable from control room to field site.
- Assist electrician gland, terminate power and control cable.
- Assist electrician to installed cable ladder and cable tray.
- Assist electrician fabricated support for new cable ladder and tray.
Education
Process Control And Instrumentation Technology - Oil and Gas
University Malaysia Pahang
Malaysia Pahang 01.2022 - 11.2024
Skills
Field instrumentation
Permit to work
Contractor supervision
Instrument Calibration
Instrumentation maintenance
Problem-solving
Multitasking
Course And Training Record
- OFFSHORE MEDICAL CHECK-UP, 05/21/26
- T-BOSIET, 04/28/28
- H2S OPITO TRAINING, 07/22/26
- MERCURY ADVANCE TRAINING
- E-PTW LEVEL 3 TRAINING
- EAGLE QUANTUM PREMIER (TRI-SYSTEM)
- GAS LIFT COMPRESSION (GLC) SKID PACKAGE BASIC OPERATION AND MAINTENANCE, 09/05/26
- DAMAGE CONTROL TEAM (DCT) TRAINING - MSTS
- CORROSION (RUST AND COATING) AWARENESS TRAINING - SINGLE PACK ZINC (SPZ)
Contact Number
019-8399838
Race
Iban
Personal Information
- Nationality: Malaysia
- Religion: Christian
Timeline
INSTRUMENT SUPERVISOR
MAXGRIP SERVICE SDN BHD
11.2024 - Current
INSTRUMENT SUPERVISOR
EPOMS SDN BHD
10.2022 - 11.2024
Process Control And Instrumentation Technology - Oil and Gas
University Malaysia Pahang
01.2022 - 11.2024
SENIOR INSTRUMENT TECHNICIAN
ELECTRO SERVE (M) SDN BHD
02.2021 - 09.2022
SENIOR INSTRUMENT TECHNICIAN
EPOMS SDN BHD
12.2019 - 12.2020
E&I FOREMAN
PETRA RESOURSES SDN BHD
05.2017 - 12.2019
HVAC TEAM LEADER
NAIM ENGINEERING SDN
10.2016 - 04.2017
E&I SUPERVISOR
FATIMAH BERSATU SDN BHD
11.2015 - 09.2016
E&I SUPERVISOR / FOREMAN
PETRA RESOURCES SDN BHD
03.2005 - 06.2015
E&I TECHNICIAN
SARKU ENGINEERING SERVICES SDN BHD
03.2002 - 01.2005
INSTRUMENT TECHNICIAN
WEHAYA SDN BHD
08.2001 - 02.2002
E&I TECHNICIAN
DAYANG ENTERPRISE SDN BHD
07.2000 - 07.2001
ELECTRICAL TECHNICIAN
TYCO ENGINEERING CONTRUCTION (M) SDN BHD
06.1995 - 04.2000
ASSISTANT ELECTRICIAN
MAZER KENTZ (M) SDN BHD
10.1994 - 01.1995
Similar Profiles
Weller McCreedy Weller McCreedy null
Material Coordinator at Maxgrip Services Sdn BhdMaterial Coordinator at Maxgrip Services Sdn Bhd
Soraya IwaidSoraya Iwaid
GSS Senior Analyst at Shell Business Service Centre Sdn BhdGSS Senior Analyst at Shell Business Service Centre Sdn Bhd
LOW CHUN KIT DANNYLOW CHUN KIT DANNY
Account Receivable Analyst at Danone Business Service Sdn BhdAccount Receivable Analyst at Danone Business Service Sdn Bhd
Mohd Ibtisam Tay Bin Mohd Aliff TayMohd Ibtisam Tay Bin Mohd Aliff Tay
General Worker at Playbox GymGeneral Worker at Playbox Gym
LIMIN BIN ABDULLAHLIMIN BIN ABDULLAH
Senior Process Technician/Field Site Leader at OCI Terrasus Sdn BhdSenior Process Technician/Field Site Leader at OCI Terrasus Sdn Bhd