MARCO WONG LIK ONG
QAQC ENGINEER/WELDING ENGINEER/GENERAL INSPECTOR/THIRD PARTY INSPECTOR
Kuala Lumpur,KL
Summary
Graduated as a Bachelor of Mechanical and Manufacturing Engineering in University Malaysia Sarawak. Over 12 years’ experiences with 8 years of EPCC project based, 3 years of RBI in service life plant and 1 year of Offshore maintenance services, involving in oil and gas industries like oil refinery plant, petrochemical plant, gas to liquid plant, power plant and subsea project (Manifold and Mudmat Structural Fabrication). Join the careers with multinational company which include JGC Asia Pacific, TechnipFMC, Samsung Engineering, Toyo Engineering and Bureau Veritas, RINA Energy as a general inspector, third party inspector, welding and coating inspector, Piping Inspector, Test packages Coordinator, NDE Expeditor and QC engineer. Overall, I experienced the QAQC inspection activities in materials receiving, civil (Piling and Earthworks), structure (Padding, Levelling and Alignment), welding (GTAW, SMAW, GMAW, FCAW, SAW), piping (Fit Up, Visual, Line check, Hydrotest, Flushing Blowing and Reinstatement) and painting/ coating.
Overview
11
11
years of professional experience
6
6
Certifications
3
3
Languages
Work History
General Inspector/Third Party Inspector
RINA Malaysia Energy Sdn. Bhd.
02.2024 - Current
- Inspection, expediting and pre-shipment on materials and equipment at Manufacturers / Vendor’s premises
- To check Vendor qualifications and auditing including project specification procedures, WPS, welder certificate, equipment calibration and inspection tools certificates
- To review and approve the daily inspection reports
- To monitor the NDE (RT, UT, MT, PT, FT, PMI and HT) activities to be carried out at workshop
- Review, maintain non-conformance report register and close out the non-conformance report on timely manner
- Client: Petronas Carigali Sdn
- Bhd
Welding Inspector
Oceancare Corporation Sdn. Bhd.
07.2014 - Current
- Conducting visual check and carry out conventional NDT such as MPI, DPI and thorough visual assisted by standard inspection tools
- Witness all welding repairs and subsequent NDTs
- Dimensional check of sub and complete assemblies of fabricated items to ensure compliance to approved drawing and specifications
- Review and approve all RT films and reports
- Witness all integrity tests including hydrostatic test
- Witness special welding processes such as post weld heat treatment (PWHT)
- Compile inspection report and punch list of outstanding items
- Review and approved all radiographic test results
- Review and compile fabrication documents
- Issuance of completion report
- Client: Petronas Carigali Sdn
- Bhd
- (Sarawak Operation) – Miri, Sarawak
Technical Assistant (Planner)
Dayang Enterprise Sdn. Bhd.
07.2013 - Current
- Assist project engineer onsite to monitor progress of works and prepare daily progress report
- Prepare daily status report
- (Rental of equipment, consumables and manpower)
- Compile project close-out report
- Assist to provide technical supports and progress monitoring during offshore maintenance execution
- Assist to review scopes of works in inspection report in relation to drawings of photograph and highlights any unclear aspects of work scope
- Assist project engineer to do positive isolation and hydrotest checklist by referring P&ID drawing for piping replacement
- Assist project engineer to do jobcard task details and manhours calculation for each jobcards
- Project Involved: Baronia TSM (BNDP-A, BNDP-B, BNP-A & BNP-B), Temana TSM (TEJT- W, TEJT- CC & TEK-A @ OCT SD) & Betty CWR (Removed LPSC K7000 Compressor)
- Client: Petronas Carigali Sdn
- Bhd
- (Sarawak Operation) – Miri, Sarawak
Lead QC Inspector
JGC Asia Pacific
10.2022 - 12.2023
- Prepares Contractor QC’s specifications and procedures
- Monitors and coordinate witnessed inspection and testing activities, and ensures it is effectively and efficiently carried-out through the inspection report review
- Closely monitors and ensures that PQP is effectively implemented
- Takes immediate actions to address quality issues
- Controls non-conformities, conducts root cause analysis and takes remedial actions
- Identifies and implements opportunities for continual improvement to include increasing quality and productivity
- Review and approval of inspection record book and inspection disposition report in timely manner
- Participates and organizes meetings, as required, internally within JGC/vendor or with the Client
- Periodically reports to the project team and QC department
- Provides support for any production issues that may occur during the project
- Implements lessons learned in the project and performs other work duties which are delegated by managers
- Client: Shell MDS (M) Sdn
- Bhd
Welding & Coating Inspector with NDE Interpretation
Technipfmc
05.2022 - 07.2022
- Appraise product quality in accordance with the Project Quality Plan and Inspection & Test Plan and determine conformity and non-conformity
- All inspection results need to be documented and if non-conformity exists, documentation shall be raised to establish corrective action
- Perform field inspections of fit up & welding in accordance with project requirements and scope of work as noted within the Project Quality Plan / Inspection Test Plan
- Meets all necessary HSE regulations with the right compliance management system
- Carry out audit and quality surveillance on fabrication subcontractors
- Responsible for timely inspection and QC supervision during fabrication and installation, proactive in the prevention of non-compliance and problem resolution
- Report any non-complying items to the QAQC Coordinator & QAQC Manager that need to be isolated to prevent inappropriate use
- Provide weekly input to the QAQC reporting system, with regards to trends and unresolved exceptions and problems
- Provide early warning of potential quality problems and ensure non-conformances are identified, tracked and closed
- Client: Petronas Carigali Sdn
- Bhd
Welding & Painting Inspector
Samsung Engineering (M) Sdn. Bhd.
07.2021 - 04.2022
- Review Contractor’s method statements, QC procedures, ITP and Quality Plan and assist with establishing acceptable working practices for construction activities
- Perform routine surveillance, inspection, monitoring, auditing & assurance of Contractor’s site activities (Fabrication and Welding, NDT, Coating and Painting) in accordance with the Projects and Contractors, specifications, ITP and Quality Plans
- Conduct daily inspection for lay out and cutting, fit-up, material inspection, dimensional, spool release activities prior to painting
- Coordinate to NDT subcontractor regarding RT, MT, PT, UT, HT, PMI and PWHT joint
- Witness and inspection hydro testing and pneumatic test inspection to ensure that all requirements are meet the project specification standards
- Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification, and commissioning requirements
- Prepare Inspection test Panel for painting works
- Conduct painting test panel using Pull-off Test and X-Cut
- Perform inspection of piping surface preparation after blasting, paint mixing, humidity, WFT and DFT
- Meet and compliance in accordance with HSE standard and requirements
- Client: Sarawak Petchem Sdn
- Bhd
Lead QC Engineer (Multi Discipline)
Toyo Engineering & Construction Sdn. Bhd.
07.2020 - 06.2021
- Perform Materials inspection for Piling and foundation (Main bar and Link) Works
- Check and witness the piling point coordination surveying for marking point before piling installation
- Check and witness the verticality and length of piling installation
- Witness the PDA test of piling
- Witness the level survey of excavated foundation bottom, rebar and formwork inspection, line and level survey before and after concreting
- Witness the concrete materials test cube
- Visual inspection of concreting and back filling of the foundation
- Prepare and close test packages civil for the handover job to commissioning team
- Perform Materials inspection for Structural works
- Witness the WPS and WQT in compliance with AWS D1.1 standard
- Prepare test packages structure
- To perform visual inspection and dimensional check of completed weldment against specification requirements and drawings
- To perform inspection on foundation lines and level check, alignment and bolting, and grouting of base of structural installation
- Perform Materials inspection for piping works
- Witness the WPS and WQT with standard reference of ASME SEC IX
- To perform inspection on fit-up check and visual on weldment
- Review NDE procedure and reports including RT, UT MT, and PT with standard references of ASME SEC V and B31.3
- To perform line check, review welding history sheet and make sure all the NDE clearances are completed before releasing for pressure test
- Witness the pressure test of each test loop
- Inspection on flushing and blowing of each line after pressure test
- Prepare Welder performance record and test packages piping
- Perform Materials inspection for static and rotating equipment
- Witness and check the foundation chipping, padding, lines and level
- To perform the inspection on alignment, bolting, internal parts during installation and grouting of base after installation
- To witness and check the pump base alignment, first shaft alignment (before piping), second shaft alignment (after piping) and motor test run (By E&I)
- To perform final visual inspection, prepare and close the test packages
- Client: BRB Malaysia Sdn
- Bhd
Piping Inspector (Dosh Representative)
Bureau Veritas (M) Sdn. Bhd.
03.2019 - 03.2020
- Perform third party survey and inspection and determine the conformity with specified reference requirements
- Review drawings, designs, and specifications for boilers and other vessels as per DOSH FMA requirements and ASME standards
- Review the ITPL of the HRSG, WPS, welders’ certificates, Isometric drawing, NDT procedures, NDT Matrix, Preheat & PWHT procedures, Boiler (Heat Recovery Steam Generator) Erection procedures and welding consumables storage procedures
- Review of welding inspection documentations including Fit-up and visual reports
- Review NDE reports including RT, UT, PAUT, MT, PT, PWHT and HT
- Witnesses the hydrostatic test with Dosh (Department of Safety and Health) Malaysia officer to make sure the conditions of the boiler proper, boiler external piping and non-boiler external piping are fit for purposes
- Client: Sarawak Energy Sdn
- Bhd
Test Packages Coordinator & NDE Expeditor (Lead)
Toyo Engineering & Construction Sdn. Bhd.
05.2018 - 12.2018
- Coordination with the Designated Sub-Contractors and area on responsibilities
- Distributes test packages to Inspectors and Line Checkers for site verification
- Receive Test Packages for expediting NDE clearance before released for testing
- Review and coordination of NDE and outstanding Inspection
- Monitor, records and clearing of QC related punch items
- Final review and sign off test packages from QC department before released for testing
- Ensure that all testing activities are conducted as per the Hydrotest and Flushing Procedure
- Liaise closely with Piping Superintendent, Flange Management team to ensure both (Hydrotest & FM Procedures) are strictly adhered to prior to hydrotest activities commencing
- Ensure that reinstatements are completed to strictly meet the requirements of Build it Clean Procedure
- Ensures that Test packs are reviewed for completeness and compliance by managing Hydrotest Coordinators
- Work very closely with the Field Engineers to make sure that the test pack documentation (marked up P&ID, Test Pack Isometrics, NDE clearance certificate, test pack procedure, test pack check sheets etc.) are checked and signed off acceptable prior to test commencing
- Ensure all completed test documentation is signed off as accepted by all relevant authorities
- Review sequence of work with Contractors Hydrotest Team and assist with the prioritization of the test packs to best meet the required completion dates
- Client: Petronas Refinery & Petrochemical Corporation – Pengerang, Johor
Welding & Painting Inspector
Ice Petroleum Sdn. Bhd.
02.2017 - 05.2018
- Monitoring & inspection of execution of Steel Structure works pertaining to Main Pipe rack, Unit pipe racks, Equipment structures, Optical Silo, Storage Silo, sub-Pipe racks & Compressor Shelters as per approved drawings & Specifications
- Attending to RFI’s raised by concerned at various stages of inspection like Pad Plate inspection, Fit-up & visual welding, NDT inspection, alignment, Bolt tightening, gratings fixing, handrail erection etc
- Release of Structure to preceding department after inspection
- Ensure proper cleaning and paint touch up before erection
- Resolving Technical discrepancies arise on Site in consultation with seniors
- Issuing punch list on job completion and closing punch list for final completion and hand over to client
- Visual Inspection of welded joints of steel members according to code AWS D 1.1
- Witness and monitor suppliers/contractors work activities, inspection, and test in accordance with the approved Quality Plan, ITP, Quality Procedures etc
- Responsible for as built drawing, Dossier, and field instruction for Structural work
- Preparation of Daily/weekly inspection reports, pre- and post-reports, worksheets, noncompliance reports etc
- Client: Petronas Refinery & Petrochemical Corporation – Pengerang, Johor
Education
Bachelor of Engineering with Honours - Mechanical and Manufacturing Engineering
University Malaysia Sarawak
01.2009 - 1 2013
Skills
Building and construction
Affiliations
Registration of Engineers Act 1967, GRADUATE ENGINEERS, Board of Engineer Malaysia, G1210665A, Mechanical, 222-060000-G1210665A
Professional Highlights
- Kasawari Phase II Carbon Capture Storage, RINA Malaysia Energy Sdn. Bhd., Petronas Carigali Sdn. Bhd., Third Party Inspector, 02/10/24, present
- Limbayong Deepwater EPCIC, JGC Asia Pacific, Shell MDS (M) Sdn. Bhd., QC Inspector, 10/15/22, 12/20/23
- Limbayong Deepwater EPCIC, Technipfmc, Petronas Carigali Sdn. Bhd., Welding & Coating Inspector with NDE Interpretation, 05/01/22, 07/12/22
- Sarawak Methanol Project, Samsung Engineering (M) Sdn. Bhd., Sarawak Petchem Sdn. Bhd., Welding & Painting Inspector, 07/21/21, 04/20/22
- Provision of EPCC of Silicone GMP Blending Facility For Project Brant, Toyo Engineering & Construction Sdn. Bhd., BRB Malaysia Sdn. Bhd., Lead QC Engineer (Multi Discipline), 07/06/20, 06/30/21
- Combined Cycle Power Plant, Bureau Veritas (M) Sdn. Bhd., Sarawak Energy Sdn. Bhd., Piping Inspector (Dosh Representative), 03/01/19, 03/31/20
- Petronas Rapid Project - Package 5 (Steam Cracker Complex), Toyo Engineering & Construction Sdn. Bhd., Petronas Refinery & Petrochemical Corporation – Pengerang, Johor, Test Packages Coordinator & NDE Expeditor (Lead), 05/21/18, 12/15/18
- Petronas Rapid Project - Package 14 (Utilities, Interconnecting, Offsite Unit), Ice Petroleum Sdn. Bhd., Petronas Refinery & Petrochemical Corporation – Pengerang, Johor, Welding & Painting Inspector, 02/07/17, 05/10/18
- Provision of Inspection, Servicing and Calibration of Protective Relays, Oceancare Corporation Sdn. Bhd., Petronas Carigali Sdn. Bhd. (Sarawak Operation) – Miri, Sarawak, Welding Inspector, 07/14/14, 02/01/17
- Provision of Topside Structural Maintenance Services for Petronas Carigali Sdn. Bhd., Dayang Enterprise Sdn. Bhd., Petronas Carigali Sdn. Bhd. (Sarawak Operation) – Miri, Sarawak, Technical Assistant (Planner), 07/22/13, 07/04/14
Competencycertificates
- BGAS – CSWIP Painting Inspector Grade 2, 565302, 03/31/29
- ICORR Protective Coating Inspector Level 2, C10861, 06/30/27
- CSWIP 3.2.1 Senior Welding Inspector, 323467/2, 11/30/27
- CSWIP Radiographic Interpreter Level 2, 363643/2, 05/31/29
- CSWIP Ultrasonic Inspector Level 2, Group 3.1 – Butt Welds in Plate, 112680/2, 10/31/26
- ASNT Level 2 (SNT-TC-1A), MT, PT, RI, UT, MC-CE-MT/L2/E001, MC-CE-PT/L2/E001, MC-CE-RI/L2/E001, MC-CE-UT/L2/E001, 09/30/26
Identitycardno
881231-13-5547
Personal Information
- Age: 35
- Expected Salary: 550 USD per day
- Date of Birth: 12/31/88
- Gender: Male
- Nationality: Malaysian
- Marital Status: Married
Certification
IIW- International Welding Engineer
Timeline
IIW- International Welding Engineer
12-2024
General Inspector/Third Party Inspector
RINA Malaysia Energy Sdn. Bhd.
02.2024 - Current
Lead QC Inspector
JGC Asia Pacific
10.2022 - 12.2023
Welding & Coating Inspector with NDE Interpretation
Technipfmc
05.2022 - 07.2022
Welding & Painting Inspector
Samsung Engineering (M) Sdn. Bhd.
07.2021 - 04.2022
Lead QC Engineer (Multi Discipline)
Toyo Engineering & Construction Sdn. Bhd.
07.2020 - 06.2021
Piping Inspector (Dosh Representative)
Bureau Veritas (M) Sdn. Bhd.
03.2019 - 03.2020
Test Packages Coordinator & NDE Expeditor (Lead)
Toyo Engineering & Construction Sdn. Bhd.
05.2018 - 12.2018
Welding & Painting Inspector
Ice Petroleum Sdn. Bhd.
02.2017 - 05.2018
Welding Inspector
Oceancare Corporation Sdn. Bhd.
07.2014 - Current
Technical Assistant (Planner)
Dayang Enterprise Sdn. Bhd.
07.2013 - Current
Bachelor of Engineering with Honours - Mechanical and Manufacturing Engineering
University Malaysia Sarawak
01.2009 - 1 2013
BGAS-Painting Inspector Level 2
ICORR- Protective Coating Inspector Level 2
CSWIP 3.2.1- Senior Welding Inspector
CSWIP- Radiographic Interpreter Level 2
CSWIP- Ultrasonic Level 2 (Plate)
Similar Profiles
Anand AsokanAnand Asokan
SENIOR LINUX CLOUD INFRASTRUCTURE ENGINEER at HITACHI ENERGY MALAYSIA SDN BHDSENIOR LINUX CLOUD INFRASTRUCTURE ENGINEER at HITACHI ENERGY MALAYSIA SDN BHD
AHMAD SYAIRUL HASSAN BIN SAHUDDINAHMAD SYAIRUL HASSAN BIN SAHUDDIN
Failure Analysis Engineer 1 at ADVANCED ENERGY INDUSTRIES (MALAYSIA) SDN. BHD.Failure Analysis Engineer 1 at ADVANCED ENERGY INDUSTRIES (MALAYSIA) SDN. BHD.
Danial AriffDanial Ariff
Technician at Samsung SDI Energy Malaysia Sdn. BhdTechnician at Samsung SDI Energy Malaysia Sdn. Bhd