Summary
Overview
Work History
Education
Skills
Timeline
References
Personal Information
Qualification Background
References
Generic
Haridaas Santhakumaran

Haridaas Santhakumaran

Assistant Technical Manager Cum Service Engineer
Bandar Saujana Putra

Summary

Engineering professional well-versed in providing technical support and maintenance services. Known for effectively resolving issues to improve system reliability and performance. Emphasizes teamwork and adaptability to meet evolving project requirements. Skilled in diagnostics, preventive maintenance, and customer service, with commitment to delivering high-quality results.

Overview

12
12
years of professional experience

Work History

Service Engineer

Super Poly (M) Industries Sdn Bhd
03.2019 - Current
  • Handling packaging machineries complete testing & commissioning at customer site.
  • Perform set up / installation / buy-off of machines once arrived at customer premises.
  • Experienced hands-on on Packaging machineries of shrink wrapping : Auto L- Bar Sealer, high speed Side Sealer, Vertical L-Bar Sealer and Semi Auto Sealer.
  • Attend to any breakdown to the machine which needed to be on call at any time.
  • Carry out preventive maintenance activity according to the schedule.
  • Conduct training and demonstration of machine operation system and handover to customer appropriately within timeline given.
  • Prepare documentation on analytical service report of attended servicing, to be handover to HOD for review and approval.
  • Ensure all electrical & mechanical equipment and spare parts of machineries are all in stock inventory and keep update time to time.
  • Supports parts manufacturing defect and warranty compliance verification and endorsement.
  • Paperwork preparation: Quotation, follow up with purchase order, report of service job and documentation when required.
  • Monitor the test run progress of the machine day to end to ensure there is no any complexity and satisfy customer needs.
  • Plan the servicing work in advance so the output of the factory is not affected by the service work.
  • Work in teams and delegate work among them so the work can be conducted in a fast pace.

Project Engineer

Program HI-TECH (Edwards Fire Alarm System & Service Provider)
11.2016 - 02.2019
  • Assist in management of tender estimates, preparation of preliminary project budget and assisting site management in cost control and budgeting.
  • Responsible in the procurement of subcontractors and suppliers for site as well in sourcing, negotiating, compiling & processing of material purchase for the best quality and cost.
  • Plan, manage, compiling and prepare a contract documentation for maintenance according to the technical specification.
  • Coordinate with vendors and installation contractors for feasibility and pricing verification of proposed modification.
  • Cabinet design proposal of fire alarm panel for the clients according to their quotation and purchase order.
  • Follow up and receiving the latest architectural layout plan from client side appropriately for mimic design proposal purpose.
  • Liaise with the technician and wireman at site to ensure proper installation of main local products/ devices/ modules of EDWARDS FIRE ALARM SYSTEM.
  • Communicate effectively with the contractors to interpret for their essential needs in the on-going projects.
  • Handling test and commissioning for the whole completed fire alarm system project with supervision of technician/programmer and supervisor.
  • Ensure the project must meet the tight dateline and handover to the clients within a given timeframe.
  • Providing basic system interpretation of operating mode and maintenance.
  • Demonstration and training towards contractors, consultant and other trades and relevant person in charge after the fire alarm system fully configured without any interference.

Manufacturing Engineer 1 cum Manufacturing Supervisor

ON Semiconductor Plant 1
03.2015 - 10.2015
  • Attached to the Final Test Section SOSM QFN to manage the concern device known as QFN.
  • Supervising manufacturing specialist and technician for the production line plan in a routine schedule.
  • Conduct TPM, AM & PM team (autonomous maintenance) & 5S.
  • Perform training for man power allocation according to OCAP.
  • Handling operation on Test handler such as Pick & Place, Reel and Tape (ISMECA type NY20/NX 16, UENO SEIKI high speed type LT20/LT16, RASCO type S2000 &S2800 high temp/ low temp and map test.
  • Conducting a minutes of meeting with all the shift operators and technician every week. Discuss some of the essential issues in a daily basis regarding to the development and improvement plan of production line, initiative working skill correlated between leader and worker.
  • Manage inventory control to meet the department budget and assist in budgetary control.
  • Monitoring progress of quality, yield, cost and cycle time improvement.
  • Managing manufacturing specialist (operators) in terms of their disciplinary action, attendance issues and daily performance.
  • Meet the daily output target of overall QFN products and lots. Supervision of every machine in the production line such as machinery breakdown attributed to power failure.
  • Initializing and implementing a conversion plan such as converting tester, application board and tooling which depends on device spec to be run on the machine.
  • Coordinate and liaise with every department/team, especially with process, test and equipment management to ensure producing quality tested products.
  • Meet the shipment target as per commitment scheduled for every week. Keep updates of current level critical devices or urgent lots for timely shipment to meet customer requested target.
  • Improve existing operation, incorporating new methods and process.

Process Engineer

Samsung SDIEM Energy Malaysia
07.2014 - 02.2015
  • Responsible as a technical support, improvement and synchronized to the formation process for whole management of Polymer Battery Production line.
  • Testing the product capability at the required parameter followed by finalized spec from Research and Development group which is included with Voltage capacity and Charging/Discharging Capability.
  • Initializing and debugging all those required spec in the platform system referred as a Manufacturing Execution System (MES) specifically in a Type Setting calculation.
  • Monitoring each and every polymer cell progress through the MES to continuously provide a formation process management support.
  • Executing data storage analysis by extracting every database of polymer model/series from the Manufacturing Execution System (MES) platform to compile the product capability and efficiency.
  • Provide analytical report of products completed with data variance to produce the statistic trend and report as well make observation of product condition from the sustaining level to ensure meet the optimum level of correlation between within a customer spec and formation spec.
  • Involving in provide instruction of manufacturing methods, defects disposal and all other technical guidance deemed necessary towards technician and operators.
  • Coordinate and liaised with QC department for safety and reliability test before dispatching to outgoing and warehouse department.
  • Perform (FMEA) defect analysis implementation to observe the root cause of product failure or any abnormal occurrence form the defected products.
  • Along there to lead and cross communicate with production team for temporary and permanent solution to be taken.
  • Monitoring each and every polymer cell progress through the MES to continuously provide formation process improvement/ management support.

Industrial Trainee Technician

Favelle Favco Crane (M) Sdn Bhd
09.2013 - 02.2014
  • Attached to the Production Department (Electrical Assembly).
  • Assembly of Electrical wiring system installation to the Offshore Crane.
  • Obtained knowledge on how to observe and analysis the electrical wiring diagram and single line diagram.
  • Have performed overall single phase and three phase electrical wiring utilization to the crane electrical application. Especially for two types of machinery system which is industrial AC induction motor and diesel engine.
  • Performed every installation of electrical components and instruments to the crane application.
  • Have knowledge of utilizing which type of cable such as fire resistant and fire retardant of halogen free and halogen type with several specification according to the International Electric Code (IEC) that compliance with offshore cables.
  • Performed layering cables to the every junction box with using recommended cables with including proper installation of cable glands.
  • Learned every sizes, types and measurements of the fasteners, cableglands and cables.
  • Have a experience of performed a termination of the multicore cables at the terminal block arrangement (DC Supply) for a single junction box with a supervision of technicians.
  • Have been performed wiring termination for every type of junction box such as main electrical system for AC lighting, powerpack wiring system for solenoid valves and pressure switch, winch wiring system for the limit switches.
  • Have performed a checking along with the checklist of every structure of the crane before sending Inspection request to the Quality Control Department.

Education

Bachelor In Electrical and Electronics Engineering (Hons) - Electrical and Electronics

Management and Science University
02.2014

Diploma in Electrical and Electronic Engineering - Electrical and Electronic Engineering

Pusat Teknologi Dan Pengurusan Lanjutan (PTPL)
09.2010

Skills

Microsoft Office Word

Timeline

Service Engineer

Super Poly (M) Industries Sdn Bhd
03.2019 - Current

Project Engineer

Program HI-TECH (Edwards Fire Alarm System & Service Provider)
11.2016 - 02.2019

Manufacturing Engineer 1 cum Manufacturing Supervisor

ON Semiconductor Plant 1
03.2015 - 10.2015

Process Engineer

Samsung SDIEM Energy Malaysia
07.2014 - 02.2015

Industrial Trainee Technician

Favelle Favco Crane (M) Sdn Bhd
09.2013 - 02.2014

Diploma in Electrical and Electronic Engineering - Electrical and Electronic Engineering

Pusat Teknologi Dan Pengurusan Lanjutan (PTPL)

Bachelor In Electrical and Electronics Engineering (Hons) - Electrical and Electronics

Management and Science University

References

  • Ms Choong, Human Resource and Account Manager, Super Poly (M) Industries, 012-655 9631

Personal Information

  • ID Number: 891021-08-5931
  • Age: 33
  • Ethnicity: Indian
  • Religion: Hindu
  • ID Number: 891021-08-5931
  • Date of Birth: 21 October 1989
  • Gender: Male
  • Nationality: Malaysian
  • Marital Status: Married

Qualification Background

  • Bachelor In Electrical and Electronics Engineering (Hons), Majoring In Electrical and Electronics, Management and Science University, 2011-06-01, 2014-02-28, 2014-06-21
  • Diploma in Electrical and Electronic Engineering, Majoring In Electrical and Electronic Engineering, Pusat Teknologi Dan Pengurusan Lanjutan (PTPL), 2007-03-01, 2010-09-30, 2010-07-22

References

  • Mr Yap Thin Choy, Head Of Section, Production Department of Electrical and Hydraulic Assembly, Favelle Favco, 012-6813055
  • Mr Kanniah, QFN final test Manufacturing Manager, ON Semiconductor, 012-5555460
  • Mr Vishva, Process Engineering Senior Manager, Samsung SDIEM Energy Malaysia, 019-6216193
  • Ms Sairah, Human Resource, Program HI-TECH, 012-2124203
  • Ms Choong, Human Resource and Account Manager, Super Poly (M) Industries, 012-655 9631
Haridaas SanthakumaranAssistant Technical Manager Cum Service Engineer